Boot problems

Joined
Dec 25, 2006
Messages
4
Ok so today I go in to add a hd (the computer was working perfectly before) and so I plug the hd in (sata so no jumper), add the power, and the computer wont turn on. And I mean wont turn on at all, no fans, no hd, no nothing. The only thing that makes me think that it isn't my power supply is that the LED on the mobo that tells if it has power is on.

Tried:
Removing the hd I added
Starting with screwdriver
unplugging cd drive, fans, and removing the hd i added

Specs:
AMD Athlon64 3800+
Asus A8N-SLI Deluxe
eVGA 7900 GT KO
1 Gig Corsair Valueselect Memory
160GB Seagate HD
500GB WD HD (this is the one i want to add)
Antec NeoPower 480
Plextor PX-740A DVD/CD burner combo
Thermaltake Tsunami case

Also, I have had this problem before where nothing did anything but there was no fix, it just started working for some reason... in a last ditch attempt I had smacked the on button and went to get something to drink and when I came back it was on....but no such luck this time...

Any help would be appreciated a ton :-D
 
well.. it still sounds like a PSU problem to me.. if you have a multimeter, try measuring voltages after pressing the pwr button. I once had a defective psu, that would supply only 8V on 12V rail, and the computer wouldn't started, but the voltage sould rise, and after hitting approx 11V it would start.. try differet psu if you have one..
 
Sadly I dont have, right now, a multimeter, but I did try to jump the psu and it turned on...so Im thinking maybe a short of some kind?

Yea and I just tried jumping the psu with everything in (cept the mobo and graphics card) and everything turned on a-ok...do you guys think it could be my motherboard?

Ok so I decided to see if it was the motherboard that wasn't working by moving the fans to an external fan controller, completely independant of the motherboard, and turning the system on, when the psu is jumped the fans start, but if the psu is plugged into the motherboard the fans do not start. Even if I manually make contact between the start pins on the motherboard it does not start. Could it be the RAM and if so how can I test it?
 
Back
Top