Bonding Wan @ Cisco, Juniper Other...

[dashpuppy]

Does any one know of a firewall, suggest a make model.

I need a firewall that supports bonding, I want to bond 2 wan network connections, and use 2 cable modems to gain more in&out bandwidth.

Can any one suggest me make model etc etc ?

Thanks

 

[Tee]

Barracuda Link Balancer

http://www.barracudanetworks.com/ns/products/link_overview.php

Otherwise you could try Fatpipe I thinkt hey have a product that will do this as well.

http://www.fatpipeinc.com/

 

[C7J0yc3]

As we discussed via email, your NSA 2400 can already do load balancing. For cable / fiber you don't bond an interface you either load balance or get one larger pipe.

 

[Shottah_king]

Barracuda Link Balancer

http://www.barracudanetworks.com/ns/products/link_overview.php

Otherwise you could try Fatpipe I thinkt hey have a product that will do this as well.

http://www.fatpipeinc.com/

How did the Barracuda Link Balancer work out for you?

 

[dashpuppy]

As we discussed via email, your NSA 2400 can already do load balancing. For cable / fiber you don't bond an interface you either load balance or get one larger pipe.

that doesn't really help me tho I just configured a tz240 with that, and you can only use 50% of each connection. i want to use 100% on both and create a bigger tunnel.

 

[Vito_Corleone]

Any IOS device can do this easily.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Edit: Keep in mind that a single flow/connection will still be limited to the speed of one link.

 

[dashpuppy]

Any IOS device can do this easily.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Edit: Keep in mind that a single flow/connection will still be limited to the speed of one link.

Can you recommend me a product model from cisco that does this ?

Thanks

Dash

 

[mattjw916]

any router that can run 12.4(15)T, which is just about anything that isn't obsolete...

 

[Vito_Corleone]

Can you recommend me a product model from cisco that does this ?

Thanks

Dash

What are the throughput requirements?

 

[Tee]

How did the Barracuda Link Balancer work out for you?

I love them, cheap and simple! Work well to. What more could you really ask for

 

[WesM63]

http://hardforum.com/showthread.php?t=1459667

Similar to Vito's link.

 

[Shottah_king]

I love them, cheap and simple! Work well to. What more could you really ask for

Do you have the Link Balancer connected to, two different service providers?

 

[dashpuppy]

I found this,

http://www.mushroomnetworks.com/product.aspx?product_id=1000

 

[Tee]

Do you have the Link Balancer connected to, two different service providers?

TDS, Comcast.