Bizarre K9A2 Platinum issue

brokenarrow03

[H]ard|Gawd
Joined
Nov 20, 2007
Messages
1,655
So I got my K9A2 platinum board in last week and spent a bunch of time setting it up with 4 x 9600GSO's for my [H] folding rig. I put the power to it and pushed the button and it did nothing, the amber LED in the middle of the board was on, other wise nothing. I tried another switch considering this was one yanked from an old, but starting, pc, still nothing. So I am frustrated and just keep pushing the power button on the first switch that I hooked back up and after about the 15th (no joke) time i pushed it it started and ran fine for several hours. then I shut it down overnight and came back to it the next day only to have it do the same thing, and again after about the dozenth time it started. Lol...any ideas:confused:

 
What power supply are you using? Have you tried reducing the number of installed video cards? I have a p6n diamond that refuses to boot with 4 cards installed but will boot with 3. Its time to to start taking away components to try and isolate the problem.
 
What power supply are you using? Have you tried reducing the number of installed video cards? I have a p6n diamond that refuses to boot with 4 cards installed but will boot with 3. Its time to to start taking away components to try and isolate the problem.

Hmm, could be...
 
As crazy as this sounds it could just be the board. A friend of mine owned this board and experienced something really similar where the PC would rarely power on once shut down but would then start working seemingly at random. My theory was that his case was deformed and the video cards weren't seating properly/unseating at random, but he exchanged the board for an ASUS so I never did find out. Sorry this isn't more concrete. Brycejones is dead-on that you need to strip the build down and see if what state it reliably POSTs in.
 
So I got my K9A2 platinum board in last week and spent a bunch of time setting it up with 4 x 9600GSO's for my [H] folding rig. I put the power to it and pushed the button and it did nothing, the amber LED in the middle of the board was on, other wise nothing. I tried another switch considering this was one yanked from an old, but starting, pc, still nothing. So I am frustrated and just keep pushing the power button on the first switch that I hooked back up and after about the 15th (no joke) time i pushed it it started and ran fine for several hours. then I shut it down overnight and came back to it the next day only to have it do the same thing, and again after about the dozenth time it started. Lol...any ideas:confused:

MSI K9A2 Plat running 4 9800 GTX+'s reliably on a 1kw Corsair PSU. Just letting you know you can do it :).
 
MSI K9A2 Plat running 4 9800 GTX+'s reliably on a 1kw Corsair PSU. Just letting you know you can do it :).


Actually K9A2 Platinum is the board of choice for running up to 4 9800GX2s, it is one of the few boards that has a layout and bios that will allow it to boot with 8 GPUs, but there could be a manufacturing defect that is causing his problem. That is where I was really headed with my comments. ;)
 
Mine did a similar thing, except mine wouldn't boot at all. After testing various psu's laying around the house, I decided to not hook up the +4 pin on the 20+4 pin atx connector......That seemed to do the trick as it booted up perfectly. This fixed it for me hope it helps any1 in future.
 
Back
Top