BIOS/Windows saying Pentium D hyperthreads

ajd344

n00b
Joined
Apr 1, 2006
Messages
24
Hello! I finished my first build. It has a Pentium D 805 and an Asus P5P800-VM. When I go in to CPU Setup in the bios, I can either enable Hyperthreading or disable it. By default it was enabled. When I disable Hyperthreading, Windows only sees one CPU. But when I enable it, Windows sees two CPUs. Why? Pentium D's arent hyperthreading.

How can I fix it and take full advantage of my Pentium D?

Thanks!
 
how is it not taking full advantage of your cpu? do you want to see more than 2 proc's???
 
Uhm, no. I'm wondering why I have to enable hyperthreading in order to see 2 cpus, when my CPU isnt even hyperthreading.
 
Thats the standard display in system properties for HT processors, you must disable HT in your BIOS or you'll have some weird things happen. The HT in your bios has nothing to do with DC processors unless it is a EE cpu.
 
Loadedaxe said:
Thats the standard display in system properties for HT processors, you must disable HT in your BIOS or you'll have some weird things happen. The HT in your bios has nothing to do with DC processors unless it is a EE cpu.

Well, I did a little test. With HT enabled, it took 20 minutes to convert a file, but with it disabled it took 30 minutes. What type of weird stuff could happen? Am I hurting the cpu?
 
It can make it run hot for one thing and cause reboots and BSOD, HT shouldnt make a dual core cpu run faster unless it has HT support like the Extreme Editions. It doesnt have HT, so enabling that function isn't going to boost the speed.
 
I think what's happening is that his BIOS isn't differentiating between HT and true Dual core. When he disables HTin the bios, the bios removes the second core from the system's configuration table (ACPI?) as it would a virtual second processor. Then when windows boots, it doesn't see that his system has a second core and doesn't utilize it. As for any problems enabling HT might cause, you'll just have to play it by ear. If you have heat, and or stability problems, try to see if there's a BIOS update.

EDIT: Just looked up your board and it looks to be a really old motherboard. It may be just that dual core cpus weren't out when it was made and it doesn't know the difference between HT and DualCore. I'd check for BIOS updates.
 
Back
Top