BIOS updating... your take on it.

pbXassassinX1524

[H]ard|Gawd
Joined
Nov 24, 2003
Messages
1,295
I'm building m 1st computer and I'm wondering if the BIOS updates are something that I should get as son as a new one comes out or only if I have some conflict in the system.... I've heard both things.

The mobo I got was the new asus with the SiS 655tx chipset I think it was the P4S800D-E deluxe, and it has like 5 different ways that you can go about updating the bios... most seem pretty easy and I noticed there was one you could do in windows too. So... what do you guys think I should do?
 
Bios updates are a very good thing because they can fix a ton of incompatibilities. Try to avoid windows based flash methods as those have a higher chance of failing....only do it if you really have to.

Honestly i'd say you should put yer system together first, run it, stress test it and if its stable then leave the bios alone. You can always update it sometime in the future once you've read up on it a bit.
 
I've never had a problem updating BIOS's with windows flash utilities - it has been quick and painless. I recommend only using the ones provided by your respective mobo maker, though.
 
On just about every manufacturers website, the recommendation is to flash the BIOS only when you are having problems with the operation of your hardware/software and a newer BIOS update will address those problems directly. Basically if it ain't broke, don't try to fix it ;)
 
ok, thanks guys... I don't think I'm going to play around with it until I really need to... still kind of uneasy of the whole process.

What are the best stress testers in your opinion?
 
There's a whole bunch you can use...
SiSoft (there's a burn in util, plus benchmarking tools)
Prime
Memtest
3dmarks

You can run a bunch of them together and that'll really work your CPU (except memtest, that tests memory).
 
IMO, the Prime95 "torture test" is the most reliable stress tester around.

I routinely flash my BIOS if the changelog indicates any additions which I'd be interested in. I haven't used Windows-based flash utilities since the last time I had an MSI board.

Basically if your BIOS is socketed, you shouldn't have too many compunctions about flashing because you can always pull it and have it reprogrammed. If it's soldered to the board, then maybe you should think about it beforehand.
 
Back
Top