BIOS reports CPU change, normal?

lurker-drop

Limp Gawd
Joined
Oct 31, 2003
Messages
141
I have an Abit motherboard and I recently took out the CPU and put it back in again Upon trying to put it back in some pins were bent but I bent them back into place And it fitted the slot fine So I go to boot, it reports the CPU is either UNWORKABLE or that it has changed...

Fearing it might be because the CPU was dead, I pressed F1 to save changes, and it booted into windows just fine, I;m running Prime95 right now just to be sure

My question is, the BIOS will report hardware changes sometimes, does it do this with the CPU also? I mean maybe if I changed CPUs but this is the same CPU...
 
Sure this is a common thing, you can just change the multiplier on unlocked Athlons and it'll show a different CPU.

For example: Asus A7N8X Deluxe v1.04 / Barton 2500+ (unlocked) wouldn't go above 185mhz FSB speed, so I raised the multiplier from the stock 11 to 14 and the board AND Windows reported it as as a Barton 3200+.

Of course too many changes like that and you'll have to re-register Windows, but that's not that big a deal.
 
Yes, that is what happens as qdemn says. When I took my proc out of the socket to clean it and apply new thermal paste and dropped it back in, even that was enough for BIOS to give me a CPU unworkable error. A quick hop into BIOS and it was clear and fine though.
 
Back
Top