Bios problems

Joined
Jun 7, 2004
Messages
734
The other day I posted a problem with not being able to get into my bios. I don't think I was completely clear on some of my problems, so I'm gonna try again...I apologize for the length of this post but I'm trying to cover everything I did that lead to my problems.

I have an ASUS P4C800E-Deluxe mb. Usually when you boot you get a splash screen, well recently it stopped coming up but everything seemed to be running fine. Then I tried to get into my bios and couldn't. It just hangs after it finds my hd's. If I hit ctrl-alt-delete it boots into windows fine and everything works ok. Well, then I purchased some Corsair XMS pc-3200 ram. I installed it and booted my system and everything was ok. I then went to check my timings with cpu-z and saw that the timings were a lot slower than advertised. I needed to get into my bios to mess with my timings. So, I figured that if I flashed my bios to the most recent version maybe it would fix my problem of not being able to get into it. I did so and it said it was succesful and rebooted. Held down delete during post and got the same thing, hangs after finding my hd's. Only problem now is that the ctrl-alt-delete trick doesn't boot into windows anymore. It just hangs after finding my hd's. I tried many things and couldn't get it to post. I even put my old ram back in and it still wont post. Eventually, after nothing I did worked, I went and picked up an ASUS P4C800-deluxe mb. Almost the same board as I had. I installed that, with the new ram, and couldn't get it to post either. Moved the ram around to different dimm slots and nothing. Finally, I put my old ram into it and it posted fine and everything seems to be running fine. So, I go to check and see if I can get into my bios and the same thing happens, just hangs after finding my hd's.

Now, as I understand it, you should be able to get into your bios regardless of problems with XP. I haven't been having any real issues with XP but I did just install SP2 recently. I also installed a 500w Ultra modular psu recently but had no problems after the install of that. So, my questions are how can a bios problem stick around after a new mb install? And if it's not the bios wtf is it? I'm thinking of formatting and doing a clean install of XP but am not real confident that will work since bios should have nothing to do with XP. I've torn my rig apart and put it back together 4 times now. I have very little hair left from pulling it out. I'm freakin' stuck, someone help me please.

System specs in sig.
 
Flashing your BIOS due to a problem like that is....well silly. It was never going to fix your problem unless it was a bug in the previous BIOS revision. Sounds like you're screwed.
Mind you that happened to me once, flashed the BIOS hoping it would fix something which wasn't the previous BIOS's fault....hosed the board. Sent the board back and they reflashed it.

Gavin Doherty
 
Back
Top