BIOS mods on 8x00 cards

Flandry

Weaksauce
Joined
Sep 6, 2007
Messages
85
I don't hear much about people modding their BIOSes these days -- who has modded their Gf8 series cards, and how did it turn out?

From what i understand, the lack of VIDs (supposedly there are only 2, with the cards already using the higher one)* makes a voltage mod via BIOS impossible. Has anyone actually tried this?
 
There is a huge "How to" thread in the nvidia section, most people's results are in there.
 
I don't hear much about people modding their BIOSes these days -- who has modded their Gf8 series cards, and how did it turn out?

From what i understand, the lack of VIDs (supposedly there are only 2, with the cards already using the higher one)* makes a voltage mod via BIOS impossible. Has anyone actually tried this?

Yes, I don't believe there is an option to change voltages in bios, only mem timings and clocks can be altered.
 
You can change everything. Voltage, the HEX memoryt timings, core speed, shader speed, and ram speed. Just be careful. An unsuccessful flash = board no workie, and on most companies, there goes your warranty. BIOS flashes for video cards aren't usually covered, because they're not like motherboard flashes. You're picking the programmed info here, and you could render the card useless.

ALWAYS BACK UP THE ORIGINAL
 
Not only back up the original.. but either have the exact steps written down or have a boot disk made with an automatic flash to stock bios in order to be able to do a blind flash (no video on screen).

I actually had to do this with my 7900gs.... it would have been a lot easier to have a boot floppy with a batch file (autoexec.bat could be set up to do it).
 
Back
Top