Bios Flashing

Suki243

Gawd
Joined
Jun 30, 2003
Messages
542
How do i flash my bios? I downloaded the bios update from asus and it tells me that i have to create a boot disk and i tried in the dos screeen but it says it cant then i tried in control panel add/ remove software but that option is not even there so how do i flash my bios
 
typically youd download Dr DOS and build a floopy, then add the .bin and flash utility to it and then boot to it and run the flash utility
 
i dont get how to do the first part
"Please insert a clean, unformatted disk into A:\ drive and boot the system into DOS mode. In DOS mode, please type in C:\> FORMAT A: /S or click on "Add/Remove Software" icon in "Control Panel" under Windows O/S. Choose "Create Boot Disk" icon and click on the "Create" button. By using the procedure above, you can create a boot disk without AUTOEXEC.BAT and CONFIG.SYS files."
i put my disk in the a drive and i go to the dos screen and type that and it says unable to. then i do the control panel thing and the create boot disk option is not there
 
for that part simply download Dr DOS as linked
run it, you will be prompted to insert a floopy
do so
it will write just the files required to boot without any other drivers
exactly what you want for BIOS flashing
then simply add the flashing utility (example awardflash) and the actual BIOS
0.0.0.0.bin or whatever the .bin file is
 
http://filext.com/detaillist.php?extdetail=.rom
.rom
Read Only Memory Image
Various emulators and hardware upgrades use this extension. You need a flash program that is usually available from your motherboard manufacturer's Website. Do not flash a BIOS unless you know you have the image for your motherboard. Flashing the wrong image could disable your computer.
-------------------------------------------------
in short intsead of a .bin file which is a binary file, your flash utility uses a Read Only Memory Image, as mentioned just make sure you use the right version of the BIOS and the proper flash utility

and under no circumstances restart during a flash (or loose power)
or you will need to replace the EEPROM chip or have it reprogrammed

In one of my boxes (where I play with BIOS modding on occassion) Ive outfitted it with an aftermarket dual BIOS chip
RD1 BIOS Savior
mostly because of the BIOS modding, if something is truely FUBARD in the new BIOS
this will let you revert to the old one easily

in the event everything goes wrong and you screw the pooch, you have downtime and ?$25 or so for a new chip through the mobo manufacturer, or send the chip out to be reflashed in an EEPROM programmer, alternately there is hotflashing a EEPROM if you have access to an identical mobo

all said and done, barring modded BIOS Ive never had a bad flash
its scary the first time, but soon becomes routine

Good Luck ;)
 
Umm, question - why use Dr.DOS?

My WinXP Pro system made a plain-jane bootable floppy that worked just fine with AWDFLASH. (floppy in drive, right click on floppy drive icon, select "format", check the "create an MS-DOS startup disk" box, ...churn churn churn... voila! Bootable floppy to which I copy awdflash.exe and the BIOS .bin file).

Is there something I'm missing?

BB
 
it lacks any memory management drivers like emm386 or himem which could compromise the BIOS-Update.
And is specifically built for BIOS flashing ;)

Suki243 forgot to add you may need to change the boot order in your BIOS before your able to boot to the floppy, set the first device to floopy if it isnt already ;)
 
Back
Top