• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Bigadv problem?

L

lehmann

[H]ard|Gawd
Joined
Feb 8, 2005
Messages
1,362
[14:52:35] Completed 232500 out of 250000 steps (93%)
[15:24:54] Completed 235000 out of 250000 steps (94%)
[15:57:13] Completed 237500 out of 250000 steps (95%)
[16:29:31] Completed 240000 out of 250000 steps (96%)
[17:01:48] Completed 242500 out of 250000 steps (97%)
[17:34:06] Completed 245000 out of 250000 steps (98%)
[18:06:24] Completed 247500 out of 250000 steps (99%)
[18:08:33] - Autosending finished units... [September 14 18:08:33 UTC]
[18:08:33] Trying to send all finished work units
[18:08:33] + No unsent completed units remaining.
[18:08:33] - Autosend completed
[18:38:40] Completed 250000 out of 250000 steps (100%)
[18:38:52] DynamicWrapper: Finished Work Unit: sleep=10000
[18:39:02]
[18:39:02] Finished Work Unit:
[18:39:02] - Reading up to 52713120 from "work/wudata_02.trr": Read 52713120
[18:39:02] - Checksum of file (work/wudata_02.trr) read from disk doesn't match
[18:39:02]
[18:39:02] Folding@home Core Shutdown: FILE_IO_ERROR
[18:39:05] CoreStatus = 75 (117)
[18:39:05] Error opening or reading from a file.
[18:39:05] Deleting current work unit & continuing...
[18:39:25] Trying to send all finished work units
[18:39:25] + No unsent completed units remaining.
[18:39:25] - Preparing to get new work unit...
[18:39:25] Cleaning up work directory
[18:39:25] + Attempting to get work packet
[18:39:25] Passkey found
[18:39:25] - Will indicate memory of 4087 MB
[18:39:25] - Connecting to assignment server
[18:39:25] Connecting to http://assign.stanford.edu:8080/
[18:39:26] Posted data.
[18:39:26] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[18:39:26] + News From Folding@Home: Welcome to Folding@Home
[18:39:26] Loaded queue successfully.
[18:39:26] Sent data
[18:39:26] Connecting to http://171.64.65.54:8080/
[18:39:26] Posted data.
[18:39:26] Initial: 0000; - Receiving payload (expected size: 1765577)
[18:39:29] - Downloaded at ~574 kB/s
[18:39:29] - Averaged speed for that direction ~1941 kB/s
 
Happened to me once or twice in the past. Never figured it out. Please tell me this wasn't a P2684... :(
 
52mb so not big adv. The other giveaway is the TPF.

I have had issue before. No way to figure it out.
 
capreppy said:
52mb so not big adv. The other giveaway is the TPF.

I have had issue before. No way to figure it out.
Click to expand...
Yeah, you're right, didn't bother looking at the TPF. Well, at least it wasn't a -bigadv. That would have been much worse....

Is your disk subsystem operating perfectly, lehmann?
 
Its a 2686 32 minute fram times. where do you see the mb's. disk seems to be working. is there any way to check it? everything i run is fairly new not that it matters
 
Last edited:
I guess your hardware should be OK if it's new and not giving you other issues. Which WU was it?
 
Here's the key bit:

[18:39:02] Finished Work Unit:
[18:39:02] - Reading up to 52713120 from "work/wudata_02.trr": Read 52713120
[18:39:02] - Checksum of file (work/wudata_02.trr) read from disk doesn't match
[18:39:02]
[18:39:02] Folding@home Core Shutdown: FILE_IO_ERROR
[18:39:05] CoreStatus = 75 (117)
[18:39:05] Error opening or reading from a file.
[18:39:05] Deleting current work unit & continuing...
Click to expand...

My last bigadv was around 100MB, so it looks like it was corrupted halfway through? Never had this happen personally.
 
I saw that on a few a while ago. I think it was the 2682s before they switch to 2692. Haven't seen one do that in a while though. They were also on an smp 16 machine.
 
I got a couple of 2682s on my SR-2 and they refused to even start. Never had a WU complete and then fail with a read/checksum error.
 
I hope this doesn't mean there are bad WUs in the wild...
 
capreppy said:
52mb so not big adv. The other giveaway is the TPF.

I have had issue before. No way to figure it out.
Click to expand...

I believe i've had 2 bigadv's in the past that were right around the 52 or 56mb mark when it successfully uploaded. If my memory serves me correctly, one was a 2692 and the other may have been a 2686. Those TPF's don't look off to me as it looks like a non 2684 bigadv running on a very fast Bloomfield.
 
lehmann said:
Its a lynnfield. 860@4.0 my 920@4.0 is minute faster.
Click to expand...

Damn........I forgot about the "other" Core i7's. Those are some incredible times though as a 2686 has a TPF of 36 minutes on folding1. 2685's have a TPF of 39 minutes, and of course 2684's have a TPF of 51-52 minutes on the Bloomfield.
 
here's my 920 doing a 2686, [10:42:38] Project: 2686 (Run 8, Clone 3, Gen 16)
[10:42:38]
[10:42:38] Assembly optimizations on if available.
[10:42:38] Entering M.D.
[10:42:46] Completed 0 out of 250000 steps (0%)
[11:13:47] Completed 2500 out of 250000 steps (1%)
[11:26:41] - Autosending finished units... [September 15 11:26:41 UTC]
[11:26:41] Trying to send all finished work units
[11:26:41] + No unsent completed units remaining.
[11:26:41] - Autosend completed
[11:44:46] Completed 5000 out of 250000 steps (2%)
[12:15:45] Completed 7500 out of 250000 steps (3%)
[12:46:44] Completed 10000 out of 250000 steps (4%)
[13:17:44] Completed 12500 out of 250000 steps (5%)
[13:48:44] Completed 15000 out of 250000 steps (6%)
 
Last edited:
lehmann said:
here's my 920 doing a 2684, [10:42:38] Project: 2686 (Run 8, Clone 3, Gen 16)
[10:42:38]
[10:42:38] Assembly optimizations on if available.
[10:42:38] Entering M.D.
[10:42:46] Completed 0 out of 250000 steps (0%)
[11:13:47] Completed 2500 out of 250000 steps (1%)
[11:26:41] - Autosending finished units... [September 15 11:26:41 UTC]
[11:26:41] Trying to send all finished work units
[11:26:41] + No unsent completed units remaining.
[11:26:41] - Autosend completed
[11:44:46] Completed 5000 out of 250000 steps (2%)
[12:15:45] Completed 7500 out of 250000 steps (3%)
[12:46:44] Completed 10000 out of 250000 steps (4%)
[13:17:44] Completed 12500 out of 250000 steps (5%)
[13:48:44] Completed 15000 out of 250000 steps (6%)
Click to expand...


How come your log file says 2686 then? :D

I originally looked at those and was gonna ask you what your ancient chinese secret was considering that my Gulftown can't hit those TPF's on those pesky 2684's.
 
lehmann said:
typo! fixed i must have 2684 fears on the brain?
Click to expand...

We all do man. Nothing is more of a bummer than getting those pesky things that take almost 4 days to complete on a i7. I still prefer them to the even peskier 6701/6702's though.
 
You must log in or register to reply here.
Back
Top