Big problem for ME :( keeps going into BIOS??

Tony Montana

[H]ard|Gawd
Joined
Sep 11, 2001
Messages
1,336
Ok well here it goes. I have two computers the one im on now i never use. I tryed hooking them up with a crossover cable i have two lan card in my good one and one in this one i wanted this one to use my other computer's internet. So i pluged both of them in and setup this one (XP Pro) then setup my good one that i always use and i had to restart the one i use all the time (AMD XP 2.2Ghz ABIT NF7-S v2 512 PC 3200 dual channel) so it went to the regular BIOS screen it checked the CPU speed and shit and it beeped like it always goes but this time it just went to BIOS by its self kinda odd so i just exited and it went back in and back in i unplugged my HDDs retryed it still went to BIOS without me touching a thing so i took out the MOBO battery for 5 minutes tryed ity again it still went into BIOS. I put in the XP us to boot from CD ROM first it still went to the BIOS i cant really do anything, i dont know what to do i know its probably because i tryed connecthing the two comptuers or something but why would it keep going into t BIOS just from something network related??? any suggestions?
 
Punctuation helps, man.

Have you tried a different keyboard? And does it still keep jumping into BIOS when the crossover is disconnected?
 
everything is back to normal thanks the DEL key was stuck/ i knew it was something simple/


but the two computers still arnt connected if someone is willing to help me get them connected aim prophet8511
 
I have no idea how to setup 2 computers like that, but you should check out some hubs at bestbuy or wherever you shop, ive seen some rather nice ones for $20 or less.
 
Well, first of all..i do not think you need a crossover cable at all..


the isp modem you have should go into one of your nics. the other nic should go into the nic of the computer you want to hook up. (i actually plugged into a hub as i wanted multiple computers and routers were a little pricy 3 years ago)

You need to have 2 nics installed to even see this, so i am pullign this from emeory from 3 years ago....

right click on the local area connection for the nic that is connected to the isp modem..go to properities. there should be a tab that says internet sharing...somethign liek that.

go to that tab... it will say something like... share this connection and allow you to choose what you want to chare it with....choose the other nic.

once this is done, you should be able to browse on the second one...make sure you are setup for dhcp.


let me know if this works... i know i did this on win2k... so it might be different on xp.

danny
 
Yeah, what he said.

Side note, if you connect the other computer to the A7N8X-based computer on the LEFT ethernet port, I think you can get away with not using crossover. I THINK. The 3Com controller is apparently MDI/MDI-X aware. (Pretty nifty, I thought.)

Meantime, if you're in XP, I think just bridging the two NICs is enough. Remember to set the other computer to use the router comp as gateway, and you'll need to copy over DNS settings and stuff as well.
 
Back
Top