BGMicro VFD - Color Possiblities

Tlafeir

Gawd
Joined
Sep 9, 2000
Messages
652
Hi,

I have a standard blue-green bigass bgmicro vfd. I would like to change the color to a dark blue or violet color. What can I use to change the color (filter?) and where can I buy this stuff?

Thank you.
 
I put a piece of blue film (light gel) from a photography lighting kit we have at work. There must be a cheaper, easier source for this sort of thing, but it did make it a richer blue color.
link
 
There is actualy a much simplar way to do this, I myself could not find any sort of colored filter in any local stores and did not want to purchase a 20 dollar filter from noritake or MO. So i came across a much cheaper way of doing so.


krylon.JPG


the before pic.
winvfd.JPG


and the after pic.
bluescreen2.JPG


If you want the full log on how to do this check it out here in my project log Black Lightning.

Hope this was helpful, Total cost of project was under 10 dollars for the paint and the masking tape.

JEEVES
 
As I said in my post above, it seems like there should be a cheap easy source for tinted film. Like a craft store or something. Perhaps a report-cover from a stationary store.
Jeeves
Did you spray it directly on the original glass?
 
delbert said:
As I said in my post above, it seems like there should be a cheap easy source for tinted film. Like a craft store or something. Perhaps a report-cover from a stationary store.
Jeeves
Did you spray it directly on the original glass?

The report cover does not work that well, Did not tint it enough. And yes i did spray it directly onto the glass, however if you do not like the finished product it scrapes right off with a razor. It is a very gel like finish that comes off with ease. if you click on the link in my above post it has step by step pics of what i did.

JEEVES
 
Back
Top