BFG 6800GT PCI-E RMA question...

Joined
Sep 7, 2004
Messages
3,032
When you RMA the card to they send you a new one or do they try and repair it.............And also I think I was having boot problems with my DFI Lanparty nf4 SLI-DR because of it..because whenever I tried to powerup, the power light on front of the tower would just continuously blink on and off and I noticed that the only time the light on the video card would turn on is for only a second when i pressed the power button on the tower, but when i looked at the diagnostic leds on my motherboard, all three leds would be lighted except the last one which means startup,but if i removed the pci-e card and tried to boot, then only the first light which means video card would light up...what does this all mean?!?!
 
Was the computer continuously turning on and off? Like the fans spun up and down as well?
 
Not turning on and off, I would get 3 leds on my mobo's diagnostic led, but computer would never bootup. I read up on this on DFI-Street.com, and apparently it seems like it part of that cold boot issue with certain ram....I have the OCZ Gold VX pc-400 ram and it seems like the mobo/ram combo is causing the problem, where the ram isnt getting enough voltage?...i switched my ram from the orange slots to the yellow slots, when my vid. card comes back i will try and see if i can boot.
As a consumer I think that it is totally outrageous that a bios fix or something has not been released to fix this issue ASAP by DFI, from what I've seen hundreds of people are having this issue. It's my only computer at home and I can no longer use it...for a few weeks I kept trying to turn it off via the switch on back of power supply and turn it on again and it would work after like 10-15 tries, but it's rediculous that I should have to do something like that to get my computer working.
It's safe to say I'm extremely dissatisfied, I'm NEVER buying anything DFI ever again, I don't blame OCZ for this or any ram company since this doesnt happen with any other board manufacturer that I know of. I think after spending over 2000 on upgrades including mobo, ram, vidcard, psu, speakers, LCD monitor, UPS, dvdwriter, sata drives, i think I have a right to a working computer. If I could return this to monarch computers I would but i think its too late, I wish I had this problem the first week i bought it. If switching the ram slots dont work, I'm gonna try updating bios IF i can ever get a successful boot, if that doesnt work im gonna take a sledgehammer to this POS board and mail to DFI with a bag of my poo smeared on it. ;)
 
I just RMA'd a BFG 6800 GT. One morning when I booted up my PC it started smoking. I called them, they asked what power supply I was using and told me to send it in. I sent it priority mail and it got there on a Wednesday at 10:00am. They had already sent out a new one via UPS that same afternoon. I've been 110% happy with the service I received from them with the warranty coverage. :cool:
 
Ya their phone support seems pretty friendly and to the point, but I've only called them once.
 
TheMadHatterXxX said:
When you RMA the card to they send you a new one or do they try and repair it.............And also I think I was having boot problems with my DFI Lanparty nf4 SLI-DR because of it..because whenever I tried to powerup, the power light on front of the tower would just continuously blink on and off and I noticed that the only time the light on the video card would turn on is for only a second when i pressed the power button on the tower, but when i looked at the diagnostic leds on my motherboard, all three leds would be lighted except the last one which means startup,but if i removed the pci-e card and tried to boot, then only the first light which means video card would light up...what does this all mean?!?!


I had the exact same problem.
Make sure you HAVE NOT moved the "4 Volt DIMM" jumper to the 4V position yet, and then place your RAM in the ORANGE slots for Dual Channel. Reset the CMOS jumper and see what happens.
 
Back
Top