BFG 6800 Ultra OC WC

Suntar

Limp Gawd
Joined
Jul 22, 2004
Messages
285
Does anyone know the thread size on the waterblock it comes with? I believe its one of the koolance waterblocks, but Im not sure.

Any whoo, I know the stock tube size that it comes with is 1/4 TUBE, but I need to know the thread size for it (the part were the hose connecter screws into the waterblock).

I would much rater put new hose connecters on it (but I can only do this if the thread size is 1/4) then buy converters and lower my water flow.

Thanks

-Suntar
 
The BFG uses a Koolance GPU-180-L06 180W Video block and they also give you two 1/4 to 3/8 adapters. The thread size is about 3/8"
 
Thompson5439 said:
The BFG uses a Koolance GPU-180-L06 180W Video block and they also give you two 1/4 to 3/8 adapters. The thread size is about 3/8"
they make 3/8 thread size? Do you know were I can get a 3/8 thread to 1/2 ID barbed elbow adapter to screw into the block? Dont want to use adapters >_<

Thanks
 
The tubing is 1/4" ID, 3/8" OD. Same as all other Koolance products.
 
I know what the tubing is, Im asking what the THREADING size is, the part were it SCREWS into the waterblock,


NOT the part were you slide the tube on

Thanks
 
:confused:
Suntar said:
I know what the tubing is, Im asking what the THREADING size is, the part were it SCREWS into the waterblock,


NOT the part were you slide the tube on
Yeah fallguy, answer what the man said! He needs thread size, not tubing! :p
 
i dont need to buy one I need to know the threading on the damn thing, no one seems to know :( even the people who own them :eek:
 
Wait a week for the dangerden block, it has 9/16" straight threads. I'm using an MCW-50 on my ultra just fine atm tho with the new mounting kit.
 
yeah, i like the dangerden blocks, easy for water hose mounting cause the barbs poitn up.
 
Suntar,
How do you measure thread size? I have the orginal block sitting on my desk awaiting your instructions.
 
if you can find some way to take them out, (not sure how) Simply measure how meany threads per inch. Heres a link to explain it better. http://www.skgrimes.com/adapter/index2.htm

Now Im sorry to do this to ya, but it will require some math ^_^

Basicly you gotta think of the adapter to be an inch long, then, you measure how many threads there are per inch, and if its a 1/4 Threaded adapter, it will have 18 threads per inch.

1/4 inch - 18 threads per inch

1/2 inch - 14 threads per inch



Thanks man!
 
Sorry it took so long getting back.
I just finished upgrading my NF3-150 to a Asus A8V Viapro 939 with a 3800+ cpu.

It appears to be 32 TPI on the male fitting.
:cool:
 
Thompson5439 said:
Sorry it took so long getting back.
I just finished upgrading my NF3-150 to a Asus A8V Viapro 939 with a 3800+ cpu.

It appears to be 32 TPI on the male fitting.
:cool:
Thompson, you are by far, the coolest guy ever. YOur the only one who has helped me out of 4 different fourms, thanks a bunch man!

Unfourtuently, this is way to small, so it looks like I will get a differnt 6800ultra, and put on the new dangerden block.

Thanks alot man, you really helped me out of a jam!
 
Back
Top