BF2 Gfx glitches (screenies)

pistol222

Weaksauce
Joined
Apr 21, 2005
Messages
74
After MUCH tinkering and tweaking last night, I was finally able to get the game to run pretty smooth and look nice as well. But when I got the settings that got me the best result (frame-wise), I then started to get these *other* glitches which involved some weird textures and redraw...

I'm at 1280x960, 75hz, 2xAA, 4xAF (turned off in game, set through nVidia panel), GeForce BFG 6800 OC (256mb), 1gb ram, 2.8ghz P4- I'm using the drivers that came with the demo (77.30) too. Most stuff set to high- the only things set lower are lighting (med), shadows (low), and terrain (med). The AA in the game is 'Off', and my distance view is at 90%

Any idea of what could be causing this? I'm referring to the diagonal texture lines near the ground - they seem to occur more often when I encounter grass or weeds- they don't seem to show up too much in urban settings...Then sometimes I'll get the giant pixel line coming off my weapon that extends to the sky....


Take a look:

screen000.jpg

screen001.jpg

screen002.jpg
 
I don't know about you but I've saw this HUGE gray monolith in the middle of the harbor on the Dragon map....keeps popping up when I flew by it....has anyone else seen that? Oh I like your spaghetti strings.....
-Rikus
 
WhyYouLoveMe said:
Indeed... or perhaps it's getting too hot?

But how could that be? I have nothing else running and the card is barely a few months old...Not overclocked or anything else weird that I know of...

This problem actually also happened in the PC version of the original GTA- it was unplayable because of all the texture lines, but I don't think that game would have made my card run too hot...

Anyone recommend any settings I should mess with to try and fix it?
 
neuroquake said:
Maybe upgrade to the new offical drivers posted on nVidia's website.

But aren't they older than the ones that came with the demo?

EDIT: Ok, never mind I see that they're newer- must have missed that upgrade...
 
It has to do with the RAM getting to hot on your vid card. Mine does the same thing sometimes. Has to do with the memory getting corrupted. So you get edges of polygons or something that are rendered into infinite. I don't know the exact explanation but just know that it is usually vid card memory.
 
d34dly said:
It has to do with the RAM getting to hot on your vid card. Mine does the same thing sometimes. Has to do with the memory getting corrupted. So you get edges of polygons or something that are rendered into infinite. I don't know the exact explanation but just know that it is usually vid card memory.

So you think if it persists after upgrading to the new drivers I should call BFG?
 
first upgrade you vid card drivers there are new ones from nvidia released yesterday.


dont set aa and af through the nvida control panel do it in game. much better
 
pistol222 said:
So you think if it persists after upgrading to the new drivers I should call BFG?

Yeah if it persists. I would definately call them. But do try new drivers first. BFG has great tech support... when you can get through. So if nothing else works give them a call and they can help you out.
 
if enuff ppl complain about the texture splitting they will patch the game so stop worrying about it, from a game release its going to be awhile until they get all the bugs worked out of the game.
 
d34dly said:
Yeah if it persists. I would definately call them. But do try new drivers first. BFG has great tech support... when you can get through. So if nothing else works give them a call and they can help you out.

I actually got an email response from them within an hour of me writing to them- WOW.

Response:

Thank you for your request.

I would reccomend uninstalling your video card, running driver cleaner
pro (www.drivercleaner.net), and reinstalling using driver version
77.72, release by nvidia yesterday.

Battlefield 2 should run just fine on our cards - we tested it in-depth
on the 6600 and 6800 cards yesterday, and many of us played it all
night at home.

To check to make sure your card's not overheating, open your forceware
tool and check the temperature reading. The card should be anywhere
from 50-84 degrees and be able to operate fine. If Battlefield 2 is the
only app giving you this kind of problem, it's more than likely either
something with the game, or the drivers for your card.

So now I have to try this stuff when I get home later. How does one know the temperature of one's card DURING the actual game?
 
Just run the game and then Alt-Tab out of the game while it's running and open up the vid card property box. You can then check in there. Don't close the game and then check because the temp can drop that fast.
 
pistol222 said:
Thanks- what are my options if the card *is* running too hot?

Usually you can RMA your card. It may be that your heatsink isn't coming into good contact with your RAM. My 6800GT is that way... just haven't gotten around to doing anything about it. It doesn't happen to often for me and when it does I just restart and it goes away.
 
pistol222 said:
Thanks- what are my options if the card *is* running too hot?

Maybe I'm gettint elementary here... but try a can of air to blow out the vid card and your case. Dust builds up FAST. (at least in Arizona it does... hehe)
 
WhyYouLoveMe said:
Maybe I'm gettint elementary here... but try a can of air to blow out the vid card and your case. Dust builds up FAST. (at least in Arizona it does... hehe)

I guess most of us assume that people have tried this already. A can of air should be in any computer owners reach. But you know how people can be... :p
 
Yeah, I usually only muck around in there when it comes time to upgrade something...

But I guess it's been a while so I will do the canned air thing as well... :D
 
pistol222 said:
Yeah, I usually only muck around in there when it comes time to upgrade something...

But I guess it's been a while so I will do the canned air thing as well... :D

Seriously. I do it every 6-8 weeks, and after doing it yesterday, it took 5 deg. C off my temps.
 
pistol222 said:
So you think if it persists after upgrading to the new drivers I should call BFG?


I had the same prob over a year a go with my BFG gf4 4200 even un overclocked and in a cold room I would get those wierd distortions extactly as in your pic..


I called BFG they said it was due to bad memory on the card so cross shiped me a new card free of charge...... I got my new card before they got my old one they shipped it so fast..
 
Well, still getting similar problems but now they have to do with the models in the game- as in myself and other players that are running around online...

I'll get these infinite lines that come out of my weapon and extend upwards- very often blocking my line of sight. Cost me a few lives here and there...ugh.

I tried everything listed in this thread - wiped out old stuff, used Driver Cleaner, installed new nVidia's, dusted out my case, set AA to be controlled by the game, etc, etc...at my wit's end now. Besides the fact that the game itself is pretty choppy when the action gets hot & heavy. So much that there's no way I can whip around quickly and shoot someone behind me. If you sneak up on me while I'm playing, ya got me- no matter what..lol.

Going to have to try out some different in-game settings- running right now at 1280 res with most things set to high except for lighting & shadows. Interesting thing happened from last time- I set the 'terrain' to medium and I was getting lines on the ground as in my first screenies- now I set it to high and the lines on the ground go away and I get lines on the people...

WTF- this is why people are buying consoles...:p
 
Back
Top