• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Best Window Kits

C

choogi

n00b
Joined
Sep 16, 2007
Messages
30
I want to cut a side window into my Lian Li a05b but haven't ever done it before. I was just wondering what some of you guys might recommend for window kits =)
 
Drill with 1/8 inch bit.

Dremmel or other cutting tool.

Rivet gun and box of rivets.

Sheet of Lexan/Plexiglass.

Creativity.

Profit.


EDIT: For clarity, you get a sheet of plexi/lexan that is larger than the window you want, you cut the window and lay the plexi/lexan on the back side (inside) of the panel and clamp it down. (Keep it tight, alignment is important)

Then, drill a hole every 2-4 inches along the outside of the window hole at least 1 cm from the edge of the window. Be sure that your drill goes through the panel, then through the window plexi/lexan.

Then, remove the protective cover from the plastic window, re-align, and rivet to your panel. You are done.

Clean up the edges of the window cut before attaching the plastic.
 
You must log in or register to reply here.
Back
Top