Best temp guage for 6400?

UnlimitedMP

[H]ard|Gawd
Joined
Sep 8, 2004
Messages
1,946
All idle temps. Sig for details.

Previously I was getting ~33C with Speedfan 4.32 and Coretemp0.94

TAT gave me 50-52.

Now I dled the newest Coretemp0.95 and it agrees with TAT and I get ~49C

:confused:
 
CoreTemp 0.95 seems to be giving the most accurate temperatures. He fixed a bug with the new E4300 Allendale. It used to read Tjunction as 85C but the new correct value is 100C. This results in temperatures that are being correctly reported 15C higher than previous versions of this program for the E4300. I'm not sure what it's using for Tjunction for the new E6300 / E6400 Allendale.

What is Tjunction being reported by CoreTemp 0.95 for your processor?

The way I test a temperature monitoring program is I drop the multiplier down to 6X and reduce the FSB to a default of 266 MHz or 200 MHz for the E4300. Lower CPU voltage down to about 1.175 to 1.200 volts. Start up your computer and see what your idle temps are being reported as. If the value is less than ambient temperature then that is a sure sign that the program is not reporting your temperature correctly.

With minimum volts and MHz you should be seeing idle temps at about 2C to 5C above your room temperature as long as you applied your paste correctly and have a properly ventilated case.
 
Back
Top