I currently have a 3x120 Black Ice GT stealth 360, with 3x120mm YateLoon's hooked up to a fan controller (my Aquaero).
I'm wondering if I would see a big benefit in going to say to a Scythe 110cfm fan? Could I quiet it down or can it only run at max speed?
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=49&products_id=22545
I want a middle ground between noise and performance, not looking for a deafening delta fan..
My CPU is running at 45c idle, and ambient temps are around 33c (91F or so), goes to around 53c on load on my E6600@333mhz FSB, and I set vcore around 1.22, drops to like 1.92 on windows.
My setup goes Rad->Pump->Rad->CPU->GPU->T-line(for bleeding)->back to rad
My rig:
E6600 Watercooled D-Tek Fuzion block
Asus P5B-Deluxe Wifi
OCZ Reaper 4GBCL4
RaptorX 150GB
7950GX2 Watercooled
Black Ice GT Stealth 360 3x120mm YateLoon
Aquastream pump oc@60hz
Aquaero to control them all
I'm wondering if I would see a big benefit in going to say to a Scythe 110cfm fan? Could I quiet it down or can it only run at max speed?
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=49&products_id=22545
I want a middle ground between noise and performance, not looking for a deafening delta fan..
My CPU is running at 45c idle, and ambient temps are around 33c (91F or so), goes to around 53c on load on my E6600@333mhz FSB, and I set vcore around 1.22, drops to like 1.92 on windows.
My setup goes Rad->Pump->Rad->CPU->GPU->T-line(for bleeding)->back to rad
My rig:
E6600 Watercooled D-Tek Fuzion block
Asus P5B-Deluxe Wifi
OCZ Reaper 4GBCL4
RaptorX 150GB
7950GX2 Watercooled
Black Ice GT Stealth 360 3x120mm YateLoon
Aquastream pump oc@60hz
Aquaero to control them all