Best AMD CPU for Price & O/C??

morpheus9394

Limp Gawd
Joined
May 8, 2002
Messages
369
I currently have an INTEL system and am thinking of upgrading soon.
From what I have read AMD CPUs are making better for gaming than Intel so I am considering the move to AMD but I need some advise.

I have an 2.8ghz Northwood O/Ced to 3.4ghz with 2x512mb Twinx Corsair 3200LL DDR ram.
If I upgrade to an AMD CPU apart from changing the MB will the RAM need an upgrade or does AMD MB support that type of RAM.

What do you think is the best CPU/MB combo for speed, overclocking and price?

Thanks in advance.
 
Personally I have a 3000+ venice core with neo 2 plat.

Got to 2.7 on stock cooling at stock voltage, not to bad of a bang for your buck there. Neo 2 plat kinda killing me though AGP :( .
 
I haven't overclocked mine because of the board I have but here it goes...
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=672991
I've read about people overclocking this to 2.4 GHz or more (above 2.5 GHz).
You can't go wrong for the price.
A better board than mine to overclock might be this one:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=25208&CatId=0
then if you want to try an OK video card without paying too much:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=495593&CatId=694
There ya go. Don't be deceived by the price (those three add up to $165 US)(only missing RAM and heatsink). My Duron 1.8 GHz and Ti4200 are running at stock right now and I can still play UT2004 with high details and play demos of Doom3, Halo etc.
BTW, I ordered all my stuff from Tigerdirect. The only thing I wasn't happy with was the floppy drive they sent me.
\EDIT: Oops, maybe you can forget that video card. Someone posted a thread saying he was burned by two of them.
http://www.hardforum.com/showthread.php?t=885996
 
For all of that, the best bet will be a venice 3000+ and a DFI nf4, or nf4-UT. Refurbed this board can be had for $86 dollars shipped, is guaranteed not to be doa by newegg, and is still covered by DFIs rma process if it dies later down the road. Most refurbs are just open box items, mine overclocks as well as a new one, and it is $50 less than retail, just be prepared to print the manual out online. The DFI nf4 ut also will support "quasi" sli (not full speed on the PCI-E channels, but no cards use that much bandwidth yet), and will mod to full native sli with a simple pencil trick on the NB very similar to the old tbird unlocks. The nf4 will mod to SLI and SATA2 (all others have native sata2 support) with a similar trick.

If you must have it new, I would go with the nf4-ut for $135 new. The board packs tons of features, and is hands down the best 939 board line on the market. Quad cmos banks, fan throttling on 3 headers from the bios, bios with memtest 86 built in, tons of vdimm, vcore, LDT and chipset options. HTT limitations will not be an issue, this board scales past 333 easily. It is by far an awesome board.

If you really want the "best" price/performance, and are on a really tight budget, a sempron 2800+ is a 754 90nm chip with 256k L2 cache (others in the past were only 128k), and should overclock extremely well, given its modest stock speed of 1.6ghz. A 800mhz-1ghz overclock wouldn't be all that hard. A refurbed nf3 dfi 754 board can be had for $65 shipped.

The ram you have is fine, IMO, not sure if it is TCCD or winbond or what, but if you really want to OC your ram, and the current stuff you have isn't TCCD or winbond chips, then Twinmos SP will run you ~$95 for 2x512 and is ch-5 or bh-5. With the vdimm options of the DFI boards (others will need an expensive ddr booster) you can hit speeds of 1.5-2-2-6 1T at 230mhz without tons of effort. Mine is refurbed and I got it to 265 1.5-2-2-6, though I don't put much stock in the notion that refurbs are "bad overclockers".
 
refurbed is an option for those who know what they're doing and don't mind a few missing sata cables/manual. I simply suggested it because it costs $50 less, and is still covered by newegg against DOA, and then DFI via their RMA process. Plus my own personal experience with them is that they often times aren't refurbed, but just open box. If they were poor overclockers that would be one thing, but they aren't. FYI I'd buy a refurb from newegg before I'd buy a used or new board off of ebay. If the warranty is the same as a new one, I can't see why not to save $50, percentage wise it's a ton of cash and a real steal IMO. 99% of my opinion is based on my personal experience buying refurbs from newegg over the years. If it is worth the price premium to you to go "new", go for it, but understand that a refurb really isn't a "lesser" item, just a way for qualified users to save some big cash. I doubt I'm going to change everyones opinion of them, but then again if I did, there wouldn't be as many for me :D

I mean the way I look at it, where can else can you get the best fully SLI capable board for $86 shipped still under warranty?
 
wow, sounds like great performance at a low cost. It almost makes me want to replace my P4 3.4ghz and Asus P4C800-E Deluxe for a venice 3000+ and DFI board.
 
DFI Ultra-D
Venice 3000+

Get a nice cooler like the XP-90 with a Panaflo M1A too.
 
i would second the 3000+, but it seems that the more recent ones are more likely to be duds, making the 3200+ venice my choice :D
 
Back
Top