Benefits of Parallel Interface over Serial?

imzjustplayin

[H]ard|Gawd
Joined
Jan 24, 2006
Messages
1,171
What kind of advantages do the Parallel (LPT1) and Serial (RS-232) interface have over each other? One thing I heard is that if you want to interface with Serial,you need to have expert knowledge (as mentioned on wikipedia) in order to move commands through properly.
 
If we were discussing 486-DX2s then this would be a hot topic, worthy of debate.

As for interfacing with them, the only thing I can think of that makes serial a touch more antisocial is the fact that modems use the serial ports, and they all use the Hayes command set, which is like using tickertape to read stock prices these days as opposed to 62" televisions.

If you're not using modems, but just a straight patch lead, the only thing I can think to complicate mattersof is the old 8n1 7e1 or whatever schemo you're using. (Databits, parity, and stop bits.) Plus, of course, speed.
 
I heard that ODB interfaces over Serial but could you covert that over to the parallel interface instead and would that make things easier? Wouldn't an inherent problem with the serial interface be that you can't send multiple signals at once over the interface and instead have to send bits of info until it collects, then react to the data? So let's say you wanted to read the RPMs, fuel flow, timings, etc. all at once, wouldn't this be harder/not possible with serial but more possible with parallel? One problem I can see with the parallel interface is making changes to the ECU and seeing instant feedback so that you know what changes are doing what due to it being half duplex.
 
Parallel is easier to interface for simple electronics. RS-232 is faster but requires more sophisticated electronics at the other end.
 
Back
Top