![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Barton Overclock...
- Thread starter Squeaky1
- Start date
guess i need to play some with my 2500+ sitting at 2.4(200*12) @ 1.6v currently i guess if i dont mind the noise i could crank up the tornado and crack the whip on the poor chip
what temps you seeing under load and was that prime stable at that clock speed?
what temps you seeing under load and was that prime stable at that clock speed?
Humm..... no no... I need a better vid card firstBuckshot said:guess i need to play some with my 2500+ sitting at 2.4(200*12) @ 1.6v currently i guess if i dont mind the noise i could crank up the tornado and crack the whip on the poor chip
what temps you seeing under load and was that prime stable at that clock speed?
2.63GHz and 1.675~1.7v is as stable as a rock.. 6 hours of 3d mark looping.
To get 2.7GHz I think I'd need 1.8v, maybe 1.825. I only have a crappy cooler, so this is holding me back somewhat. Although, saying that, 2.63GHz being air-cooler silently is impressive by any standards...
The chip does not like high fsb speeds though.
To get 2.7GHz I think I'd need 1.8v, maybe 1.825. I only have a crappy cooler, so this is holding me back somewhat. Although, saying that, 2.63GHz being air-cooler silently is impressive by any standards...
The chip does not like high fsb speeds though.
think my vid is sufficient (9800xt) for now atleast. come the next revision(whatever is next after the X800PE) ill trade up and have to go PCI express also.Kendrak said:Humm..... no no... I need a better vid card first
i feel the need, the need for speed
I could get the card with little effort..... i just don't want to pay 11.9% intrest on it for a couple months when my 9600pro can run farcry 1280x1024 with textures all the way up and 2x AA. I'm happy for now..... DOOM might not be the same case.... sigh.
Lets just say I'm not $300 un satisfied with my system... maybe $150. I'd rather get my PVR set up rolling and get another 200gb of memory and become my own TV network
Live streaming or archived TV on any computer within range of my Wi/Fi network. muahahah..., ohh sorry
Lets just say I'm not $300 un satisfied with my system... maybe $150. I'd rather get my PVR set up rolling and get another 200gb of memory and become my own TV network
Live streaming or archived TV on any computer within range of my Wi/Fi network. muahahah..., ohh sorry
Fack, I want a mobile. Gonna see how far I can push my 2500 when I get the rest of my WC stuff (soon, soon). Might be time to cycle some computers at home so I can get a mobile with a NF7-S or maybe a DFI.
My A7N8X-X with uber bios takes it to 23xx (trying to find the sweet spot) just fine. Things get pretty toasty at max volts though. Vantec Aeroflow has kept up fairly well since last fall.
My A7N8X-X with uber bios takes it to 23xx (trying to find the sweet spot) just fine. Things get pretty toasty at max volts though. Vantec Aeroflow has kept up fairly well since last fall.
The main factor keeping me from picking up a Mobile is the chance that it won't do any better than my non-mobile. I don't want to spend that kind of money on a "dud".
Anybody hear anything about the Model 8 mobiles? How well they perform against the Model 10's? Some (new probably) 24/2600 Mobiles are Model 8, and all 2500's are Model 10.
Anybody hear anything about the Model 8 mobiles? How well they perform against the Model 10's? Some (new probably) 24/2600 Mobiles are Model 8, and all 2500's are Model 10.