barton 2600, voltages!?

[tulioanjos]

Is not the voltage a little bit too high?

 

[meatfestival]

Sounds about right for a Barton.
You could probably OC it a bit higher though.

 

[palmboy5]

It is a bit high.. I have my Barton 2500+ at 1.65V which should be it's stock voltage. But, unless your temperature for the CPU is high, I wouldn't worry about it, its probably a mis-read.

 

[J3ph_42]

I wouldn't worry unless it goes much over 1.8v
Also, if that is not a sensor error, and it really is getting 1.7v, you should be able to OC further.

 

[Borgschulze]

I wouldn't worry unless it goes much over 1.8v
Also, if that is not a sensor error, and it really is getting 1.7v, you should be able to OC further.

I ran a Thoroughbred-B 1800+ at 1.95v for 2 years... never had a single problem.

 

[As I Lay Dying]

yeah my barton is going good at 1.9V

 

[nigerian_businessman]

Is not the voltage a little bit too high?

I ran my 2500+ barton at 3200+ speeds @ 1.85 volts in a shuttle SFF for 3 yrs with no problems. grow a pair