Bad video card or mobo?

Viscos

n00b
Joined
Nov 10, 2005
Messages
12
Ok. I was playing Oblivion today, and all of a sudden these lines started appearing across my screen. Once this happened, I immediately exited out of the game. The lines were on my Windows desktop too. So I restarted, and they were still there(even while booting up). Now, the first thing that popped into my mind was "My video card is burned out, time to get a new one). I started playing around with it and wiggling it and the lines went away. When the video card went back to it's normal position, the lines came back.

When I open up a 3D application, I get a ton of artifacts now plus the lines that are stuck on my screen. This would lead me to believe that my video card has overheated to the extent of being permanently damaged. BUT, when I wiggle the video card all these lines and artifacts go away, so how can the video card be damaged if it's capable of displaying normally when I wiggle the card? So now i'm suspecting that the mobo is to blame, not the video card.

Just a brief description on that these lines look like. They're about 20 lines extremely close together looking around 1pixel in width. They're in colums and aren't across the whole screen. They're kind of like |||||| ||||||| ||||||| ||||||| for a rough example. There's also small tiny green and purple squares scatted across my screen. There's some flickering dots and bars too, like the display is really unstable.

Here are some system specifications in case they might help diagnos the problem.
AMD 2800+ XP Athlon Processor, ATI Radeon 9700 Pro, 1GB PC3200 Corsair RAM, 80GB ATA HD, 400w PSU, ASUS A7N8X NForce2 Mobo. I do not have another PC to test hardware on so it's either a hit or a miss. Thanks for any help.
 
I just took it out and let it cool off a little bit, it was a little hot. I put it back in, now the lines are gone but i'm still getting artifacts in 3D applications.
 
After about 5 minutes the lines came back, wiggled it again the lines are gone, will probaly be back soon. Still no clue on what's causing this.
 
It really sounds like the card is just not seated properly. You said that you wiggled the card and the lines went away, that's because after wiggling the card, it was then seated properly. Just make sure it is in the agp slot correctly. Also, make you use the screw on the card that keeps the card firmly attached to the case. When used, you shouldn't really be able to wiggle the card at all.

As far as the artifacts in 3d apps, that sounds like a separate problem, possibly overheating. My question to you would be, how long have you had the card? Also, is this the first time you have noticed the artifacting? Whenever you have artifacting, the motherboard is usually not to blame, so don't be so quick to blame it.

Hope that helps :)
 
The card is seated correctly. I've taken it out and put it back in 2 times now and the problem goes away for about 2 minutes then quickly comes back. I've had the card for about 4 years now, so it probaly is the card. It has NEVER done this before, it just started this up on friday in the middle of a game.
 
try to clean the heat sink out of any dust bunnies and if you are brave enough try to replace the thermal compound on the heat sink with some AS5. might help ya there to lower your temps.
 
Back
Top