• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Auzentech Forte Driver version 1.1 Released

F

flylow

Limp Gawd
Joined
Feb 17, 2003
Messages
366
http://www.auzensupport.com/site/download/updates.php#xfiforte

Driver release Information:

The X-Fi Forte driver supports the following operating systems:

* Microsoft Windows® 7
32-bit and 64-bit
* Microsoft Windows® Vista
32-bit and 64-bit
* Microsoft Windows® XP
32-bit and 64-bit

For a full list, see Minimum System Requirements under the Features Tab of the X-Fi Forte product page.

Release information:

* Driver Name: Forte Driver version 1.1
* File Name: Forte_1-1.zip
* Download Size: 212 Mb Zipped file
* Release Date: 07/28/2009

download

Changes in this Driver

* Automode Switcher settings/app list are restored upon reboot.

Instructions

1. If you have previously installed the driver,
first uninstall the driver and DDL/DTS pack and reboot your PC
2. Download and unzip the new driver.
3. Browse to the new driver folder > Audio folder > Setup folder.
4. Double-click "setup.exe."
5. Reboot your PC after completing the installation.

* Notes:

* DTS™ Connect available in WIndows® Vista and Windows® 7 only.
* You need to uninstall any previously installed X-Fi Forte drivers before installing. See step 1 of the instructions.

Changelog Carried Forward from Previous Drivers... [Hide]


Driver Beta 1

* Supports Windows 7 (as well as XP and Vista )
* Speakers are muted automatically when headphone is connected to Fornt Panel jack.
* Speakers are muted and sound is routed through the Rear and Front headphone jack when output mode is manually configured to "Headphone."
* Improved the MIC Boost feature to avoid the noise and interference.
 
I've just installed the card and gone straight for these drivers, but I loose all settings on reboot...is anyone else having this issue? :confused:
 
Driver Beta 1

* Supports Windows 7 (as well as XP and Vista )
* Speakers are muted automatically when headphone is connected to Fornt Panel jack.
* Speakers are muted and sound is routed through the Rear and Front headphone jack when output mode is manually configured to "Headphone."
* Improved the MIC Boost feature to avoid the noise and interference.
Click to expand...

I am blind? I don't seem to see this option.

Is there a way to get automatic mute/headphone setting with the rear headphone jack plugged in?
 
I know that the speakers can be muted when hp are plugged in but what about hp being muted? Is there a setting or do I have to unplug the hp?
 
Changes in this Driver

* Automode Switcher settings/app list are restored upon reboot.

So that's the only change?
 
No, I'm not joking! Actually, the release notes say that Automode settings have been fixed, whereas none of my settings, including Automode, are retained.

Also, auto-mute does not work with the rear jack; however, if you have both speakers and headphones in the back then if you select 'Optimize speaker output for headphones' in the Speakers section of the console, then the speakers will be muted.
 
Last edited:
The autoswitcher settings restore on reboot was fixed.
But now the autoswitcher doesn't seem to work after waking up from sleep. I cannot even switch manually via volume control. I need to kill the autoswitcher app for manual mode switch to work. autoswitch works fine after restarting app.
 
You must log in or register to reply here.
Back
Top