Automatic Load AWDFLASH.EXE .....

piscian18

[H]F Junkie
Joined
Jul 26, 2005
Messages
11,020
I killed my motherboard with a bad bios load and now it's just showing bad checksum error. It'll start to load the AWDFLASH but I just get a screen like this.


Automatic Load AWDFLASH.EXE .....


From what I've read and remember from doing videocard bios mods it really doesn't like to load AWDFLASH from a CD it prefers Floppies which I don't have. I do recall someone linking me to an ISO that would load up into a FloppyDisk Emulator type deal that kinda tricks the PC into thinking its browsing a floppy. Anyone know what I'm talking about?

Motherboards in my sig
Asus Striker Extreme I
 
This board has EZ Flash. Can't you just toss the BIOS image on a USB drive and flash from there? Where do you get 'bad checksum error'? I imagine if the BIOS image itself were corrupted the machine wouldn't boot anything, so this is probably just the BIOS configuration file which was corrupted when you flashed. Have you tried just resetting to defaults?
 
This board has EZ Flash. Can't you just toss the BIOS image on a USB drive and flash from there? Where do you get 'bad checksum error'? I imagine if the BIOS image itself were corrupted the machine wouldn't boot anything, so this is probably just the BIOS configuration file which was corrupted when you flashed. Have you tried just resetting to defaults?


Yes thats just the cmos which isnt going to do me any good. Yes it's a bad bios flash which means I can't get to the ezflash.
 
Yes thats just the cmos which isnt going to do me any good. Yes it's a bad bios flash which means I can't get to the ezflash.

Then you probably need to find or buy an old floppy drive and disk. If the BIOS is bad it's not going to be able to initialize or access any of your hardware, just whatever minimal access is hardcoded - in fact I'm surprised you see anything on the screen at all, I've done a couple of these recoveries and all I got were beep codes.
 
Then you probably need to find or buy an old floppy drive and disk. If the BIOS is bad it's not going to be able to initialize or access any of your hardware, just whatever minimal access is hardcoded - in fact I'm surprised you see anything on the screen at all, I've done a couple of these recoveries and all I got were beep codes.

I got it going. ASUS has a crash free bios recovery mode where it automatically looks for AWDFLASH.EXE on a cd or floppy and then loads whatever bios you leave in the same directory. It's just really finicky about media.


Admin kill thread please.
 
you cant flash from a floppy on a lot of newer mbs. the bios files are too big for a floppy. i havent had any problems flashing from a cd or flash drive.
 
Back
Top