ATX vs mini-ITX: DIMM spacing from CPU

kindasmart

[H]ard|Gawd
2FA
Joined
Mar 30, 2008
Messages
1,779
Is there any difference between ATX and mini-ITX as far as the distance the memory DIMM modules are from the CPU socket? If all four (or two for ITX) memory slots are filled - say for a Z87 chipset board - would there be any difference in air CPU cooler clearance to the closest memory module?

I'm trying to decide on an air cooler for my new ITX build but I'm getting conflicting reports how a cooler will fit on ATX but not ITX. The Zalman CNPS8900 Quiet does well in tests and is cheap but reports are it won't fit in some mini-ITX boards because it will hit the first DIMM.

If there is no difference it should fit with my low-profile ram. Right?
 
I'm updating this in case somebody else googles this issue.

The Zalman I linked above works with the ASUS Z87I-Deluxe and G.Skill RAM. BARELY. The Zalman is about 1mm from the power riser card on the mobo and like 2mm above the low-profile ram. I probably won't be able to remove the ram unless I remove the Zalman. The Zalman is quiet when idle but my CPU was hitting 80-83C @ 4.0 GHz. TOO hot for me. But when the machine is idle or just Firefox browsing the rig is near silent even with the two stock Corsair fans in the 250D two feet from me on desk.

If I was to do it again I'd probably get the Noctura HSF. The one that comes with 2 thin 92mm fans. The Zalman is a PITA to install. Poor engineering as the screwdriver has to be 20-30 degrees off vertical to clear HSF to screw it down. Started to scrip the screws. But it works and is quiet so all good for me.
 
Scythe Kozuti Low Profile will fit the Gigabyte F2A88N-Wifi mITX.
Its pain the ass and throws hot air at GPU.

I have an A10 7850K and mITX Mobo for sale bc of this.
Cable issues and Space issues with my case.
 
Back
Top