Attempted new motherboard install...

Borealis

Limp Gawd
Joined
Jul 28, 2004
Messages
180
So I was wondering if anyone could maybe point me in a direction in which to go from where I'm at now.

Tried to install a new Gigabyte K8VT800M tonight for my athlon64 I just got, after I installed it I couldn't get any video signal at all. I was also unable to get a signal from my mouse and keyboard. The motherboard would power up and the CPU fan was running along with the LED lights for the RAM, I tried it with a hard drive IDE connected, without. I did get a activity light from my HD.

I was also unable to perform a fresh Windows XP install since I don't have an install disk, nor do I know anyone who does have one.

Suggestions are EXTREMELY appreciated.

Thanks!
 
We need a few more details to help :)

Did it attempt to boot at all? Did you get the single beep that all was ok? You might be very lucky and have no problem with an old windows install, but generally you should do a fresh one, especially if you changed chipsets.
 
I don't think it did try to boot at all, like I said the hard drive activity lights where blinking. I couldn't get any sort of video out of it whatsoever, no mouse or keyboard lights.No, it didn't beep at all. Nothing. I did also reformat before I did this and hoped it would help since the OS was a "fresh" install, it's a compaq so it came with all their preloaded crap on it.
 
Ok, so it was a compaq desktop? Im thinking all their PSUs, boards, cases and so on are proprietery so you have to go through them to upgrade. Do you have the connectors from the case on the right pins on the mobo. I know i had a dell once that i wanted to put a new mobo in and the case connectors didnt match the new board as Dell dont follow ATX standards for things like that.

Do you have the model number of the compaq? Someone might be able to tell you with that info.
 
Borealis said:
I don't think it did try to boot at all, like I said the hard drive activity lights where blinking. I couldn't get any sort of video out of it whatsoever, no mouse or keyboard lights.No, it didn't beep at all. Nothing. I did also reformat before I did this and hoped it would help since the OS was a "fresh" install, it's a compaq so it came with all their preloaded crap on it.

If you are re-using that PC2100, that could be the problem contributing to the black screen. It may not be compatible with your board. PC2700 is probably the slowest DDR supported, but I'm not sure. Anything less than PC3200 is wasting the potential of the platform.

Without a real WinXP boot CD, you're not going to get there from here. In general an old install, fresh or not, won't work with that chipset change, unless you can boot from the CD and do a repair or another fresh install. The HAL (hardware abstraction layer) is all wrong and your system will just stall. As I recall if you're lucky, it should make it to blue screen.
 
Well, I thorhougly checked all the connectors and they all seemed right. Compaq model number is S3200NX and for the ram it says PC2100 200/266/333/400 are all supported up to I think PC3200 or above. It's also 2 diff. brands of ram, 1 kingston, 1 samsung and neither of them worked.

I also just got off the horn w/compusa where I bought it from, they said they could burn me a OEM version of XP to use on here and also said after I completely wipe the hard drive and redo everything success rate would be 100% so maybe I'll give that a go next.

I f*cking hate compaq with a passion.

About the propietary hardware on the compaq, I switched out the PSU awhile ago and it's working perfectly fine, switched from a hipro 250W to an Antec 400W with pretty much no problems.

The only things I had installed when I tried this were the CPU, RAM and tried with and without harddrives attached, couldn't even make it to bios. My monitor when working properly has a green light and it was only an amber light last night. When I talked to compaq about all this they pretty much to me to piss off, in return I told them to f*ck off.
 
Are you still using the compaq case though? If the wires dont match for the board that might be causing your issues, especially as you say the HD light is flashing even though the bios isnt booting at all. I guess you could try firing everything up outside the case and see what happens.
 
So, this really has nothing to do with Compaq... you installed your own motherboard and CPU into an old Compaq system. I mean, what were you expecting when you called them??? "Yes sir, this is how you install a Gigabyte motherboard into our computers, and here's all the settings. What's that? Oh, yes sir, we keep all that stuff laying around just in case."

It sounds like you forgot to plug in the 4pin Molex power connector to the motherboard in addition to the 20pin connector.

Also, if you're not sure what speed RAM you have, you need to find out for sure before just plugging it into your new motherboard and hoping it works. That could be the problem as well.

I was also unable to perform a fresh Windows XP install since I don't have an install disk, nor do I know anyone who does have one.

Maybe you could buy one?
 
I'll tell you what I forgot to do, and that was to connect the square 4-pin power connector (near the processor socket) , mine did the same shit.
 
Back
Top