ATI 9800AIWpro cooling/rma issues

Joined
Mar 13, 2004
Messages
26
i bought a ATI AIW 9800 pro back in late march and have yet to get it to work like its supposed to.

i installed it the following system:
Asus K8VDeluxe
AMD64 3200+ @ default clock
1GB(2*512) Mushkin "222 Special" RAM

it was installed with no othe pci cards, and original ATI HSF ina an Antec Sonata case

i was able to play UT2004 for about 30 minutes without any issues.
then character meshes would start to have polys pointing outward randomly
i figured the card was getting hot so i installed an additional 120mm fan in the sonata
now i could get about 45 minutes of play out of the card
being the do it yourselfer i am, i decided to buy a artic-cooling "vga silencer" after a friend dropped his TYAN 9800pro 30+ degrees with one
after installing it, things did get a little better (almost an hour before ut2004 made the card crap out)

then i got farcry -the card would only play fine for about 5-10 minutes before needing a 30 minute cooling off period -so i installed a heatprobe to help me decide when it was too hot
Approx 10 minutes into game (dots on glove)
Approx 20min (polysheet at top dots on left)
Approx 30min

and it got worse:
what farcry looks like currently

so i bought the Thermaltake extreme giant III and installed it.

i thought damn if anything can cool this card this is it
WRONG
now my pc screams like a somebodys torturing alvin, simon AND theodore inside it and the GP is running at 135F in 3dmark03

the "extreme giant" is now the coolest paperwieght i own and i've gone back to the VGA silencer for cooling

but i think the card is toast cause it works fine in 2d but in every game i own it has issues immediatly or within the first few minutes.

i've had similiar issues with painkiller, sacred, max payne2, armed and dangerous, and secret weapons over normandy.

ive tried catalyst 4.4, 4.5 and the same in omegas, ive tried underclocking with ATItool to 250/250 -same problem it just takes longer to recreate

i'm goona try to RMA the card if i can get the OEM sink back on it and make i look believable but i'm pretty sure that just a waste of shipping.

any ideas or suggestions?
 
Same problem with my AIW 9700, and I've heard of at least a few others who have had similar or identical problems. My first 9700 Pro never had any sort of heat issues whatsoever, but the AIW seems to be impossible to keep cool.
 
ive run the aiw 8500,9700,and 9800 all without problems....in gaming anyways...have you tried running the ati uninstaller and reinstalling from basics with the new drivers only? as for cooling on mine i dont do anything special. they run the stock hsf and no fans blowing on them. no overclocking either.
 
Back
Top