Asus x79 Sabertooth

stormslayer

Weaksauce
Joined
Apr 26, 2005
Messages
69
Folks:

Got the new sabertooth board and 64gb of the matched g.skill ram. Also, an msi lightning 6970, i7-3960k, sea sonic 850w, 256gb crucial m4, and a 2tb wd black.

Good news:

1. The miniature fan on the mb that has some folks worried b/c it's not passive cooling is detachable -- if it goes, you can order another and plug it in. It would take about 3 seconds.

2. The mb posted without problem w/ the g.skill. Installed windows and everything is ducky.

3. I'm coming from an x58 gigabyte board, and the bios is very pleasant.

Haven't oc'd or done anything else exciting yet. But, I thought it was worth posting that the ram worked (even with 64gb) and that the fan was easily replaced.

Best
Scott
 
64 GB? I thought I was going overkill with 32. I remember when 64 MEGs was excessive.

Good on you.
 
Let us know how it works out.

TBH im waiting for a Rev. 2 before I pick one up. I preffered the p67 sabertooth design with its 'thermal armor' look. I think asus just needed more time to design one.

Is there really any reason to have the I/O actively cooled? Its never been done before and i suspect for good reason. Its still one of the better x79 boards out there though.
 
it's not the I/O, the heatpipe from the voltage regulators goes in there and the location is to blow that heat directly out of the case.
 
So, a couple of new things.

1. without any oc, I get 19 seconds flat on hexus pifast. In comparison, I have an x58 (ud5) w/ a 980x and that gets 24.3x.

2. I have seen the boot problem other folks are reporting with the asus x79 deluxe board. I woke up one morning and the room w/ the box was cold (say, 50's). It went through several attempts with blue screens and suggestions I repair the boot record before it finally started. I left it on for hours after and it was fine.

Maybe it wasn't the cold, but it's the only crash I've had and folks suggested on the other thread taking a hair dryer to the mb.
 
I haven't had the boot issue. So it posted and everything just wouldn't get into windows?

It did lock up on me once but I'm blamming windows/drivers for that one at this time.
 
Yeah, it posted. Repeatedly crashed right after the windows splash screen came up.

Wierd.

Warmer today and no problems. Been running benchmarks so plenty of opportunity for it to act naughtily (and it hasn't).
 
SABERTOOTH will not have thermal armor lik ep67 ( due to space limitations and other layout consideration issues ) the current implementation in place is the thermal armor for the X79 SABERTOOTH board. As was correctly noted by Kranium the heatsink and fan combination were to add in heat dissipation for the VRM assembly especially when overclcoked.
 
What are you doing to do with all that RAM? I can't think of any use for 64 GB without using dual cpu's (two 6 cores) and heavy virtualization...just wondering.

Not knocking your purchase. I'm someone who wasted money on a $1,000 p4 3.4EE, and followed that with an even bigger waste of $ with an C2D X6800...

(The $1,000 QX9650 actually turned out to be the best purchase of all...too bad q9650's were out yet..still shouldve bought that and a UD3P instead of using an unlocked cpu on a p5wdh...)
 
1. most ram manufacturers (including g.skill) charge a large premium for matched sets. If you're risk acceptant, you can get two batches of 4x8gb of the same ripjaws for much less cash.

Though, if you're going to build a box like this, it's not obvious to me that you care that much about a couple hundred dollars here or there to ensure stability.

2. There's lots of things to do with ram. Run a ram drive (see the asus vids on youtube for this). Use very large datasets in stata or r. Lots of computational work.

Like a lot of things, we do it because we can.
 
I have the same mobo, CPU and RAM sitting at home waiting to be put together.
 
2. I have seen the boot problem other folks are reporting with the asus x79 deluxe board. I woke up one morning and the room w/ the box was cold (say, 50's). It went through several attempts with blue screens and suggestions I repair the boot record before it finally started. I left it on for hours after and it was fine.
How are people fixing this?!


I just got tthis board and am having the same issues... I think i have located the issue with a driver on the disk... but then again, with this information, i dont know now...

At first i thought it was a windows update... But for some reason i keep getting this bluescreen.
 
If you are overclocking, try this BIOS, UEFI 0906 for the Sabertooth X79:

UEFI 0906 for the Sabertooth X79:

http://www.megaupload.com/?d=BV1UA03Y

Fix list:

1. Enhance PCIe 3.0 Support Capability.
2. Enhance DRAM Compatibility.
3. Enhance CPU OC capability.
4. Enable VT-d support for VT-d enabled processor.
5. Speed up S3 resume time


-Raja
 
IMO the X79 isn't ripe yet although if you had an obsolete system then head on in but otherwise the x58 is pure solid reliability and cost effective with power to spare..for now anyway. enjoy and keep us posted as you test. ;)
 
IMO the X79 isn't ripe yet although if you had an obsolete system then head on in but otherwise the x58 is pure solid reliability and cost effective with power to spare..for now anyway. enjoy and keep us posted as you test. ;)

I wanted to hold on to my x58 until Haswell. But... I finally bought 3 ZR30w's for 7680x1600 gaming, and x58 simply chokes on it. Just installed my new R4E with a 3930k at 4.8. I am once again GPU limited. I'm now getting just about the same FPS at 7680x1600 as I was at 5760x1200.

Time to save up again, for 3 3gb video cards. Seeing as how only BF3 really kicks my systems ass, I might just use 5760x1200 on it and hold off until the Kepler/7970 refresh.
 
If you are overclocking, try this BIOS, UEFI 0906 for the Sabertooth X79:

UEFI 0906 for the Sabertooth X79:

http://www.megaupload.com/?d=BV1UA03Y

Fix list:

1. Enhance PCIe 3.0 Support Capability.
2. Enhance DRAM Compatibility.
3. Enhance CPU OC capability.
4. Enable VT-d support for VT-d enabled processor.
5. Speed up S3 resume time

-Raja
I've downloaded this one and the one from Asus website. But both say that this is not a EFI BIOS and the BIOS won't update..?????

I think I have narrowed it down to the ati drivers as well. Its so strange I can't finish installing all the drivers after a windows 7 installation... I keep getting a boot issue or a bluescreen on boot. Like a c000000021 or something.
 
I updated to the bios with a thumb drive using raja's link, if that helps at all.
 
Let us know how it works out.

TBH im waiting for a Rev. 2 before I pick one up. I preffered the p67 sabertooth design with its 'thermal armor' look. I think asus just needed more time to design one.

Is there really any reason to have the I/O actively cooled? Its never been done before and i suspect for good reason. Its still one of the better x79 boards out there though.

i have the P67 version of the board, and i was curious too to see the new thermal armor. I prefer the fully covered design of the p67

Some ROG board already had waterblock fitted to their northbridge and the like. An active fan (like the sabertooth p67 in option) might be userfull if the system is watercooled via radiators and there is very little airflow inside, but thats in theory....
 
Back
Top