ASUS x58 mobo recommendations?

MrSloppy

Limp Gawd
Joined
May 20, 2006
Messages
130
Now that all of the ASUS x58 mobos are out at the moment, which one is decidedly the best pick out of the bunch in terms of features, OC, and best balance between performance and price? Also, what makes the motherboard recommended superior in your eyes? I'm having trouble juggling the pros and cons between each board, I really need to purchase one shortly but I don't want to make a mistake.

P6T
P6T Deluxe
P6T Deluxe V2
P6T6 WS
Rampage II Extreme
 
Ive heard the P6T6 WS was the best Asus board out at the moment...From users and reviewers!!
 
well the ASUS Rampage 2 Extreme is a OC dream from what I have seen in reviews.. but a little excessive. :p

Honestly, the ASUS P6T Deluxe looks fine. Have seen a few peeps on here with it.

Only wish I could afford one. :)
 
P6T6 WS only if you need the NF200 junk. So far it is not needed at all for any highend 3-way SLI setup, only for the 4:th PCI-e slots for a controllercard that uses 8xPCI-e.
But if money is no issue then RIIE, P6TDeluxe any rev. if money is a issue.
 
i used the p6t deluxe (v1) for a my i7 build and overall it was a great board.. the only difficulty i encountered was learning to use the bios as i came from a nvidia 780i

it was a great board for overclocking i got my 920 to a constant 4.2ghz (no turbo and no HT) very easily.. because you can keep a 920 at a constant 21x multi using this board;)
 
it was a great board for overclocking i got my 920 to a constant 4.2ghz (no turbo and no HT) very easily.. because you can keep a 920 at a constant 21x multi using this board;)

How do you keep the 920 at a constant 21x multi with Turbo disabled?
 
P6T6 WS only if you need the NF200 junk. So far it is not needed at all for any highend 3-way SLI setup, only for the 4:th PCI-e slots for a controllercard that uses 8xPCI-e.
But if money is no issue then RIIE, P6TDeluxe any rev. if money is a issue.

If money is no issue, you still by the P6T6 WS Revo over the RIIE. Unless you need a PCI slots or firewire, the Revo is a better board. It and the EVGA Classified have hit the highest i7 OCs. Plus the Revo has a better layout if you do want to go Tri-SLI, you don't need an 8 slot case for the 3rd card.
 
If money is no issue, you still by the P6T6 WS Revo over the RIIE. Unless you need a PCI slots or firewire, the Revo is a better board. It and the EVGA Classified have hit the highest i7 OCs. Plus the Revo has a better layout if you do want to go Tri-SLI, you don't need an 8 slot case for the 3rd card.

Not from what i have seen, there RIIE is a more solid one.
Layout is no issue unless you have no problem sleeping knowing the card is very hot in TRISLI and aircooling and you dont need 8 slot even for that, Dremel is you r frien or watercooling is your ultimate solution to this small "issue".
I rather have a NF200 free board than one that dont benefit from it even on todays highend solutions.
 
Back
Top