ASUS Serial Port

Joined
Dec 5, 2008
Messages
21
I have two ASUS motherboards, and both have a 10-pin connector for a serial "COM1" connector. I picked up a connector for it, but cannot get communication to my UPS. I checked with an older computer, and it connects just fine to the UPS, so clearly the problem is either the motherboard or the connector. I have the same issue with both motherboards, which leads me to believe the connector is faulty. However, I am using two ASUS boards, so I am wondering if there is some way that the motherboard pin-out is setup differently then the connector I have. Any ideas?
 
I could not find anything from ASUS directly. They do not even give information on the pin-out. However, It appears that I am not the only one who has been in this predicament: http://blog.electronsmith.com/?p=59 This gives the pin-out information, as well as a link to a reasonably priced connector. Hopefully this can help someone else!
 
APC brand ups use a proprietary serial cable. For serial communications, you must purchase their cable or build your own cable.

If I remember right, some pins/wires are switched around...
 
APC brand ups use a proprietary serial cable. For serial communications, you must purchase their cable or build your own cable.

If I remember right, some pins/wires are switched around...

Right, but that is not an issue. Like I said, the older computer recognized it just fine.
 
Back
Top