ASUS sabertooth ... good OCer?

cleaner450

n00b
Joined
Jun 12, 2011
Messages
1
Just wondering if anyone knows or has experience with the ASUS SABERTOOTH P67 LGA 1155.

Thinking about picking one up for a new i5 2500K build. Looking for something that I can really get some good clocks with.
 
From what Ive heard and read, Sabertooth is a very good and solid board that does overclock very well. Im an AMD fan so I was pretty stoked when we finally got a Sabertooth on this side of the aisle. All the reviews for it so far have given it pretty high praise with overclocking getting very high marks. Id say its a safe bet a Sabertooth for any socket will be a beast of an overclocker.
 
I think you should be fine overclocking with a good high end motherboard from ASUS, Gigabyte, or another name brand.
 
I run my 2600K @ 4.8 gHz all day , but have benched it @ 5.2 ghz with no issues on water but I do believe you would have some good success with air as well

Sabertooth P67 * 2600K * Dominator GT * Revodrive X2 240 gb * GTX 590 Classified * Lian Li T60

1M.jpg
 
Have the same parts (sabertooth & 2600k) but waiting on CPU cooling and case.
 
Are you guys using this motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131702

I'm looking at a i7 2600k right now and trying to decide on a Mobo. Originally I was thinking of going Z68 but not sure I need to considering I'll be running two GTX460 SSC+ in SLI.

I am using that one...but it only has 2 PCI-E slots that will run at 8x each when both are filled...the Z68 probably is a better setup for multiple cards if it has the number of slots that you prefer (I haven't researched them much yet)
 
my sabertooth runs my 2600k with no issues, with no fan on the mobo to cool the components, and no issues on the temps. Pushing 4.7 Ghz on the 2600k(very quick OC never tuned it in yet)
 
I am using that one...but it only has 2 PCI-E slots that will run at 8x each when both are filled...the Z68 probably is a better setup for multiple cards if it has the number of slots that you prefer (I haven't researched them much yet)

Yeah only having 2 slots is a concern especially if running a sound card too. I would prefer to have 4 slots just for being able to expand my setup later if needed. I can't tell but is that a plastic cover going over the majority of the board?
 
Yeah only having 2 slots is a concern especially if running a sound card too. I would prefer to have 4 slots just for being able to expand my setup later if needed. I can't tell but is that a plastic cover going over the majority of the board?

everything but the CPU socket area, and any slots, the rest is covered
 
Went through nearly a solid 2 hours of benchmarking on my setup (2600K+sabretooth p67) at 5.05GhZ with just a Corsair H50. 5.1GhZ is stable, but the voltage starts to scare me above 1.4v (5.05GhZ @ 1.42v, 5.1GhZ @ 1.44v). Use a daily OC of 4.4GhZ and it stays at a nice 1.34v.
 
got rid of my P67 Sabertooth about a month ago now. It was easier to get stable than my WS Revolution has been. I'm at 5.0GHz, finally, but it took 1.515v to get there.

How are the temps on that H50? My ECO ALC would peg at 85C in OCCT under a test within 3 minutes. I wasn't comfortable with that, so I had to go full water.
 
Back
Top