• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

ASUS PB238 Odd Issue

S

SirMarty

Weaksauce
Joined
Nov 26, 2005
Messages
81
Here is an odd issue that maybe someone here can shed some light on.

At work, we are running 23" Asus PB238 monitors on HP T310 zero clients. We've had several zero clients fail with no DVI output (known issue about a bad diode and HP is replacing the affected units)

The issue is, we have (so far) 6 monitors that have stopped showing on DVI, however, they haven't been connected to the failed zero clients, but are connected to some that have been identified that will fail.

I can test these monitors fully with a PC and I get a display using DVI, VGA and Display Port. However, testing on an HP T310, I don't get DVI output (no matter what T310 I use, i've tried it on six units and on two EVGA PD06's (same chipset).

Is it possible that a diode issue (or something else related to DVI) and go from the T310 over DVI and affect the monitor ? I'm not up on the pinouts, so I don't know for sure, but I suspect that one of the pinouts used by the teredici chipset in the zero clients has been affected on the monitor side and its not a pinout that a PC's DVI connector would use.

Any suggestions ?
 
You must log in or register to reply here.
Back
Top