ASUS P6TD Strange Memory Issues

Kenjiwing

2[H]4U
Joined
Apr 6, 2009
Messages
3,736
Hi guys.. Im pretty sure this is a board issue but wanted to run it by the experts.

I have a p6td that ive had for almost 2 years now.. its overclocked with an EK nb/sb and mos coolers and temps are great.

I have 6gbs of corsair dom the blue 1600 chips.

My bios is only detecting 4gbs of memory when my bios is set to default. If I change my BLCK and set my memory to its rated speed the bios only detects 2gbs of memory..

So issue 1) my board is not detecting all 3 sticks.. issue 2) when set to rated speeds my board only detects 1 stick.

I just put my friends memory in and it did the exact same thing. I also ran memtest64 for 12 hours and it showed all 3 of my sticks of memory and reported 0 errors.

Anyone have any ideas? Im currently flashed to the newest bios.
 
I have a similar problem with my p6t deluxe. At stock speeds, my board occassionally boots only detecting 4gb of 6gb of memory (I have corsair dominator 1600mhz as well, 6gb).

Now here's the funny part, when I OC to 4ghz, everything's peachy, it always detects all 3 sticks (6gb). Letting the board control the overclock except for cpu voltage, set to 1.31v (asus sets it to some absurdly high value like 1.5v at 4ghz! The chip is absolutely fine at 1.29v, I just run 1.31 for a little bit of extra security).

This board has done this for many different bios's, including the most recent one.

Also, memtest always passes at stock / OC'd as well.
 
I have a similar problem with my p6t deluxe. At stock speeds, my board occassionally boots only detecting 4gb of 6gb of memory (I have corsair dominator 1600mhz as well, 6gb).

Now here's the funny part, when I OC to 4ghz, everything's peachy, it always detects all 3 sticks (6gb). Letting the board control the overclock except for cpu voltage, set to 1.31v (asus sets it to some absurdly high value like 1.5v at 4ghz! The chip is absolutely fine at 1.29v, I just run 1.31 for a little bit of extra security).

This board has done this for many different bios's, including the most recent one.

Also, memtest always passes at stock / OC'd as well.

Yeah.. sounds a lot like my issue..ill check asus boards and see if they have anything then.
 
Well I doubt that as Kyle here at hardocp actually reviewed the board with 12gb of the same ram im using.

In fact thats why I bought it, since Kyle said it was flawless. Something may have changed with a couple bios releases though, that's not impossible to imagine.
 
Back
Top