Hi,
I've set up my new system with the Asus P5W DH and a pair of drives connected to the EZ-RAID Sata connectors.
This normally boots fine from those drives, but when I added a new drive to one of the other Sata connectors (Tried both Sata-1 (master boot connection) and Sata-3) it tried to boot from that one instead.
Looking in the BIOS (701), the EZ Raid drives are not shown and therefore can't be added to the boot device sequence.
My next move is to try and remove all boot devices from the startup sequence and see if it will then revert to the EZ-RAID drives for booting.
Anyone have any thoughts on this though?
I've set up my new system with the Asus P5W DH and a pair of drives connected to the EZ-RAID Sata connectors.
This normally boots fine from those drives, but when I added a new drive to one of the other Sata connectors (Tried both Sata-1 (master boot connection) and Sata-3) it tried to boot from that one instead.
Looking in the BIOS (701), the EZ Raid drives are not shown and therefore can't be added to the boot device sequence.
My next move is to try and remove all boot devices from the startup sequence and see if it will then revert to the EZ-RAID drives for booting.
Anyone have any thoughts on this though?