Asus P5ad2--need Help...please

Dr.Makavelli

Limp Gawd
Joined
Jan 4, 2005
Messages
197
hey guys,

in that mobo there is 1 floppy connection, 1 harddrive connection and thats it? NO CD-ROM connection??

in the entire manual it does not say a sing damn thing about CD-ROM!!!

the harddrive cable and the cd-rom cable are exact same thing, so i have to connect the HD and my cd-rom from 1 place?


PLEASE HELP GUYS...i'm going nuts
this is my first comp i'm putting together

:confused:
 
i found this info searching in google:

One more thing... if you have several IDE Ultra ATA hard drives that you need to install in addition to CD/DVD drives, then you'll want to know that there's only a single channel of standard Ultra ATA controller port. That means you can hook up two devices (master and slave). You can use the other two channels of IDE RAID for your hard drives, but keep in mind that the controller requires a drivers disk (which you can create from the included CD-ROM) when you install your operating system, i.e. Windows XP or 2000.

but i don't get it?
 
CD-ROM drives use the IDE interface, so, essentially, you just plug the CD-DRIVE into the Hardrive plug. No biggy.
 
Check the manual again and look at the mobo layout chart. There are enough IDE controllers in there for you to hook up your CDROM & HDD's. I have this mobo, and I have 2 CDROMS (chained together) and 2 HDD's (chained together) all IDE.
 
Back
Top