System specs:
AMD Athlon 64 X2 4000+
Asus M2N-SLI Deluxe
Corsair XMS DDR2 800 (x2) @ 5-5-5-12
Antec Truepower 550
Sound Blaster Audigy 2
Thermalright XP-90 Heatsink
eVGA 7900gt KO
WD Caviar 250gb HD (SATA)
With everything at stock the system runs fine. When I overclocked the FSB to anything past 220 the system would not boot. After playing with some memory settings I got it to boot and run seemingly stable at stock voltage. At that point the system would not reboot correctly though, and I had to manually shut it off and turn it back on.
After a few "reboots" I went into CPU-Z and my processor was back to stock settings. Where do I go from here? I planned on getting the processor to around 2.6ghz, but I suppose I could be content with 2.4. Should I try putting the memory into different slots or something? I'm lost here. Thanks ahead of time.
Also the BIOS are updated to the latest version, and every patch and driver is installed that I can think of.
AMD Athlon 64 X2 4000+
Asus M2N-SLI Deluxe
Corsair XMS DDR2 800 (x2) @ 5-5-5-12
Antec Truepower 550
Sound Blaster Audigy 2
Thermalright XP-90 Heatsink
eVGA 7900gt KO
WD Caviar 250gb HD (SATA)
With everything at stock the system runs fine. When I overclocked the FSB to anything past 220 the system would not boot. After playing with some memory settings I got it to boot and run seemingly stable at stock voltage. At that point the system would not reboot correctly though, and I had to manually shut it off and turn it back on.
After a few "reboots" I went into CPU-Z and my processor was back to stock settings. Where do I go from here? I planned on getting the processor to around 2.6ghz, but I suppose I could be content with 2.4. Should I try putting the memory into different slots or something? I'm lost here. Thanks ahead of time.
Also the BIOS are updated to the latest version, and every patch and driver is installed that I can think of.