Asus m2a-vm hdmi, Vista graphics problems

fredl

n00b
Joined
Nov 3, 2004
Messages
9
I have an intel version based on the same chipset (AMD 690G) with the Abit F-I90HD which apart from some USB related BSODS has worked solid.

I just built an amd version based on the new asus m2a-vm hdmi motherboard, X2 3800+, Kingston KVR667D2N5/1g x 2.

On the intel version I get an Vista performance rating of 3.7 (with an E4300 at stock speed) and it can playback X2641080p without a problem. The Asus is another ballgame, when installing Vista it did only detect a standard VGA card, and I couldn't install Catalyst 7.4.

I flashed the Bios to 0701, after that I could install Catalyst, but I still can't get the performance rating over 1.0. The video card is reported as x1200 (should be x1250) I have tried both 7.3 and 7.4, I have confirmed that memory is in dual channel mode and I have allocated 256 MB to vram.

I get tearing and choppy video playback.

Does anyone have any suggestions where I go from here?
 
well one thing is for sure ....stay away from catalyst 7.4. it casues problems with video going blank, choppy video, and bsod on the Amd 690chipset (this is a well known issue now, and i think amd will address it with the next release).......look at asus forums !!

other than i have no clue because i am running xp on that machine....i did have the choppy video also, but all was cured when i went back to catalyst 7.2

hope this helps...
 
I will uninstall the driver and try 7.2. Does anyone know how you can get the Microsoft Vista driver for this card, I have tried Windows update but to no avail. I seem to remember that I got that one for the F-I90HD during install.

edit: After I ran an upgrade of Vista (with 7.2 installed) I got a performance rating of 3,0. So it seems that the E4300 beats the X2 3800 quite a bit.
 
so the problems went away ?

yes the e4300 is faster than the 3600, although the 3600 i a great processor:)....

what are you graphic numbers on both systems? they should be the same, since they use the same video card.....

if not, it could be a driver issue stilll .......i'm sure the next catalyst pakage will bring some imporvements, or at least i hope so ,,,,,
 
If you by graphics number mean Vistas performance rating it's 3,0 for AMD and 3,7 for Intel.
 
Yes and no, i wanted you to look at the break down of the vista performance index. what is your processor score, and what is your graphics 3d, and buisness scores...

memory score...etc....

their is something not right about the two scores..

also, do you have the link to the Intel motherboard?

finally, is your video/dvd performance still choppy?

thanks man, i just built a similar system for my friend, and i just wanted to see how it will be if he goes to vista from xp.........
;)
 
I have this mobo, the problem is not the version of Catalyst you're trying to install, the problem is how much ram you allocated to video.

Go into bios and allocate only 128mb to the video, then try installing Catalyst, everything should then work as it should.

I have no idea why this is the case, but I had the same problem.
 
the 0703.bin beta bios has fixed this problem, and added in the ability to allocated 512mb and 1024mb to video.
 
Hey have you tried the DVI port on the M2A-VM, Even with the bios updated and the latest 7.5 drivers my monitor keeps going black every few seconds and the VGA port just looks nasty! I was thinking of sending it back and getting the Foxxconn version if I cant get it going,
 
remove the latest drivers, and install 7.2 or 7.3. the latest will not work......

that should fix it....;)
 
Sorry, I've never tried the dvi port since I don't have any dvi displays. But I don't see why that wouldn't work. I use the hdmi and vga and it works perfectly, I run in clone, and I've tried extended desktop, and both work. Though extended desktop tends to be buggy if u keep changing settings. Videos play smoothly, and show up on both displays.

I forgot to mention, referrence drivers didn't install for me either, I had to use the drivers from the asus website. I recommend trying those, I have no idea what version it is, but it's called "AMD Chipset Driver Program for Windows 32bit/64bit Vista.", there's also a seperate version for windows xp x86. It's 147.6mb, just download, unzip, and install.

Let me know if that helps.
 
and just to save you the hassle of replacing your motheroard, don't!!!!! my friend has the foxconn, same exact problems as the Asus ...it is something with the chipset/ driver / bios implementation .....it needs ati to fix it. nothing to do with Asus...

if you are changing your mobo, get one with the new nvidia chipset (i guess 7050), at least nvidia has good driver support.....:)
 
I tried the 7.2 drivers and there were not as bad but still had issues, So I went ahead and got the Foxconn board, It worked perfectly out of the box with the 7.5 drivers. There are also some bios options to overclock the internal graphics core:p

The board has a nice layout and is just a bit longer so you have to put the extra 3 screws in the model is A690GM2MA-8KRS2H, I am also running windows vista 64bit and a Viewsonic VG2230WM monitor @ 1680 x 1050.

I have never had problems with any Nvidia 6150 boards.
 
glad to hear everything worked out for you, I guess these things happen. I've never tried the dvi port on mine, so sorry i couldn't be more help.
 
Back
Top