Asus A8N SLI

BizKit123

n00b
Joined
Oct 7, 2004
Messages
60
Hey, I just got an A8N SLI(first build) and i got a couple of questions.

1. What do you need to install a single SATA HD?

2. To use dual channel you need to put the memory in slot A1 and B1? Or A1 and A2? I read the manual but its a bit confusing.

3. The motherboard comes with all the cables i need right? Cause i bought OEM floppy and OEM HD.
Thanks for reading.
 
1. Bah I hope you dont need a floppy to install the Sata Drive... cuz i Dont have one.. :rolleyes:

2. Memory A1 and B1 ;)

3. Yes it includes everything you need. basically.. :p
 
Thanks for the reply, but I read somewhere that you do need to have a floppy drive to run a one SATA HD
 
Would a floppy drive attached via a USB cable work? I have one that came with my laptop and don't really want to buy a floppy drive to put in my new computer
 
BizKit123 said:
Thanks for the reply, but I read somewhere that you do need to have a floppy drive to run a one SATA HD

you will need a Floppy Drive to install the Drivers for the SATA Controller for Windows XP
without them you wont be able to partition the hard drive. now if your using linux it should come nativly.

and yes a USB Floppy Drive should work theoretically your board should support it.
 
dasaint said:
you will need a Floppy Drive to install the Drivers for the SATA Controller for Windows XP
without them you wont be able to partition the hard drive. now if your using linux it should come nativly.

and yes a USB Floppy Drive should work theoretically your board should support it.

Excuse me?

Not flaming you, but if only using one SATA drive, then he won't need a floppy, assuming he's using the NForce chipset SATA ports. Even multiple SATA drives on the NForce chipset ports he won't need SATA drivers on a floppy as long as he doesn't do a RAID array. Since he says he's just using one SATA drive, assuming he sticks with the NForce ports (the black ones, yes I own an A8N-SLI, and my MSI K8N Neo2 was like this also when it came to the SATA ports & drivers), he'll be fine without a floppy.

He would need it if he uses the Silicon Image ports (red ports on this board), or if he does do a RAID array, even on the Nforce ports.

Hope this helps.
 
Thanx good to hear. I dont have a floppy nor do I want to go buy or borrow one.. to use just this one time.. :rolleyes: Hopefully My raptor just works fine.. without any problems.. ;) *knock on wood*

Arvig said:
Excuse me?

Not flaming you, but if only using one SATA drive, then he won't need a floppy, assuming he's using the NForce chipset SATA ports. Even multiple SATA drives on the NForce chipset ports he won't need SATA drivers on a floppy as long as he doesn't do a RAID array. Since he says he's just using one SATA drive, assuming he sticks with the NForce ports (the black ones, yes I own an A8N-SLI, and my MSI K8N Neo2 was like this also), he'll be fine without a floppy.

He would need it if he uses the Silicon Image ports (red ports on this board), or if he does do a RAID array, even on the Nforce ports.

Hope this helps.
 
You can always slipstream the drivers onto a Window XP CD along w/SP2 like I did...
 
Vader said:
You can always slipstream the drivers onto a Window XP CD along w/SP2 like I did...


True, although since I actually still do BIOS updates the old fashioned way, with a floppy (and my floppy drive is one of those 7 in 1 card reader things, with the floppy counting as one of the 7 media types), I don't mind going ahead and leaving it in. :)

That, and although I think one can also put Memtest 86+ on a CD, I do like to run it, among other things of course, to see how stable I am after an overclock, assuming I've raised my memory's FSB to do the OC.

Me
 
Back
Top