Asus 4850 loud fan

steakman1971

2[H]4U
Joined
Nov 22, 2005
Messages
2,433
I just put together a system with an Asus EAH4850 video card. I set up Windows, installed apps, etc. Everything is running smoothly. I then installed Lord of the Rings Online to see test the video a bit more.

The fan on the video card kicked in - it is LOUD. It sounds like a DustBuster is running.

My old system had a Radeon 9800 Pro. I replaced its cooling system with a passive heatsink - ultra quiet. Is there anything similar for this card?

I have all of the Asus software installed and running (Asus Doctor). I haven't played with any of these yet. Should I remove these or run with them? (Maybe they are making the fan more active?).
 
Set a fixed percentage in SmartDoctor (eg 45%) then close SmartDoctor with the X. The percentage will stay fixed and won't ramp up to 100%
 
If the fan is going up to 100% speed then it probably needs to. Check the temperatures of the card, and other things like your CPU. It sounds like you need to improve airflow in your case, perhaps by running the cables differently or adding a fan.
 
Yeah, I noticed that a couple of weeks ago on the same card. The fan noise is pretty loud. That made my choice of which case to use easier: I put it in an Antec Solo since it does a good job of dampening sound.
 
It's an issue with SmartDoctor. No matter what you set it to, it will jump to 100% shortly after starting a 3D application. Just set it how you want and close it everytime you start the computer. It shouldn't be necessary, but it's a pretty simple fix for now.
 
Or Google "set 4850 fan speed" and set it to run at a reasonable speed in the ATI Catalyst Control Center profile. I keep mine at 60 percent and it's not bad... it will work until I get an aftermarket cooling solution.
 
Running the same card, played Crysis for a while with stock fan settings and it never changed speed.
I run mine with a manual lock at 40% fanspeed and it peaks at 85C in Crysis.

What are your temps??

It's an issue with SmartDoctor. No matter what you set it to, it will jump to 100% shortly after starting a 3D application. Just set it how you want and close it everytime you start the computer. It shouldn't be necessary, but it's a pretty simple fix for now.
Ah so it's a bug with the software and not a temp issue on the card?
Whew, had me scared for a minute there.

I would just uninstall SmartDoctor and use the profile fix to force the fan speed.
 
Back
Top