• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Aspire X-Navigator help

V

Ventu

n00b
Joined
Dec 14, 2004
Messages
9
Hello hard forum.
I have a few questions regarding this case and i really need the help. Ok
1. How do I use thos blue brackets.
2. How do I Take out the 3.5 Drive bays I use the lever and unlock it but I caan't get them out!.
3. How do i exactlly connect the front Leds and everything to my PSU?
 
Ventu,

I have this same case and their is no documentation inside the box. It is on the box! it shows which connectors are attached to the lights and which ones are connected to the fan controller. Look at one of the box side panels and the instructions are there.

Also the 3.5" cages are rather stiff, just give it a firm yank. After several installations and removals it will become much easier.
 
alright but the cd drive bays and the 3.5 removable bays i need help with its like the 3.5's are glued in there they don't come out.
 
There are 3 guides that align each 3.5" bay. Two on the bottom and one on the top of each cage. Start with the bottom cage, move the lever toward the back, then pull real hard straight toward the back of the case. that should be it! They are not glued in, it is just that the guides are made by notching and bending small sections of the cage and they will be very tight in the beginning.

What do you want to do with the 5.25" cages?
 
Thanx for the 3.5 help, for the 5.25 i need to know how to put the Brackets on the cd drives. and how do I insert them into the case? brackets and all
 
Screw the brackets to the drives with the metal portion to the front. open the front door of the case, and pop out one of the slot covers. The drive will slide in from the front and snap in place when the metal portion of the brackets reach the front of the metal case. To remove a drive just put a finger in each of the hollowed out sections of the case front, squeeze the metal brackets together and pull the drive out the front.

You will notice that the brackets have slots for the screws, you can make slight adjustments to the location of the bracket to align the front of the case with the front of the optical drives.

http://www.overclockercafe.com/Reviews/cases/Aspire_X-Navigator/pics/26.jpg
 
Thanx a lot my friend, I just had a Aspire X- Dreamer II case before this and i just love aspire.
 
You must log in or register to reply here.
Back
Top