I have an Areca ARC-1680.. firmware V1.51 2012-07-04, boot rom v1.51 2012-07-04, sas firmware 4.4.3.0.. (latest drivers) all the drives are in a supermicro 4U chassis with SAS/sata backplane.
I have four raid arrays setup..
Raid Set #000Dt which is supposed to have 9 members total..
RaidSet #001 which has 2
RaidMirrorImages which has 2
and the one that is disappearing..
RaidSetVS02 with 6 total drives..
Past few days i noticed some time out errors on slot 1, which isnt part of the issue here i dont think (i've tried pulling this particular drive)..
Suddenly today, i get timeouts and read errors on at least 2-3 different drives all at once.. slot 15 (shows failed) and slot 4 (failed as well)..
This should normally not be an issue.. as they are each part of a different raid6 array.. raidsetvs02 and raidset 000DT..
I pull those two drives out of the mix and bring the server back up..
I end up showing #00DT as 4/7 incomplete.. meanwhile i have like 5 free drives showing up.. they dont list as members at all.. and the RaidsetVS02 is gone.
Just for fun i pulled each of the "Free" drives while it was still on.. suddenly all show up as being raid members again.. however.. if you view the raidset info.. you see #00DT listed several times..
4/7
1/7
2/7
1/7
and Raidset Vs02 shows up mutiple times as well.. to the effect similar to:
2/6
1/6
3/6
etc..
If i go ahead and cycle the power.. things come back to where they were before, with only "FREE" showing up in many places and the vs02 raidset gone again.
I tried a different pcie slot.. no luck.. i've tried moving drives around in the supermicro chasis with no luck.
Nothing had changed in the past several months.. all enterprise drives..
Any thoughts on what i can do to revive the broken arrays and the one thats missing.. i am not sure how to proceed..
I do know that contacting areca either never results in an answer or take days and we have mission critical data on these drives (i'm not sure if there is a 3rd party tool, worst case, i could use to extract the data and restore to another massive drive somewhere)?
Thanks in advance
I have four raid arrays setup..
Raid Set #000Dt which is supposed to have 9 members total..
RaidSet #001 which has 2
RaidMirrorImages which has 2
and the one that is disappearing..
RaidSetVS02 with 6 total drives..
Past few days i noticed some time out errors on slot 1, which isnt part of the issue here i dont think (i've tried pulling this particular drive)..
Suddenly today, i get timeouts and read errors on at least 2-3 different drives all at once.. slot 15 (shows failed) and slot 4 (failed as well)..
This should normally not be an issue.. as they are each part of a different raid6 array.. raidsetvs02 and raidset 000DT..
I pull those two drives out of the mix and bring the server back up..
I end up showing #00DT as 4/7 incomplete.. meanwhile i have like 5 free drives showing up.. they dont list as members at all.. and the RaidsetVS02 is gone.
Just for fun i pulled each of the "Free" drives while it was still on.. suddenly all show up as being raid members again.. however.. if you view the raidset info.. you see #00DT listed several times..
4/7
1/7
2/7
1/7
and Raidset Vs02 shows up mutiple times as well.. to the effect similar to:
2/6
1/6
3/6
etc..
If i go ahead and cycle the power.. things come back to where they were before, with only "FREE" showing up in many places and the vs02 raidset gone again.
I tried a different pcie slot.. no luck.. i've tried moving drives around in the supermicro chasis with no luck.
Nothing had changed in the past several months.. all enterprise drives..
Any thoughts on what i can do to revive the broken arrays and the one thats missing.. i am not sure how to proceed..
I do know that contacting areca either never results in an answer or take days and we have mission critical data on these drives (i'm not sure if there is a 3rd party tool, worst case, i could use to extract the data and restore to another massive drive somewhere)?
Thanks in advance
Last edited: