I ran Linpack in OCCT today along with furmark and temps jumped to 67C! I ran the test with the "CPU:OCCT" load and temps only reached 60C with Furmark.
The pictures are as follows:
Linpack
http://img249.imageshack.us/img249/194/2010072408h18cpu1.png
OCCT
http://img135.imageshack.us/img135/2418/2010072409h37cpu1.png
I'm using a e8400 e0 @4.2GHz... running about 1.4 vcore with vdroop on (only pulling 1.36v at load)
Ambient temp is around 23? I live in Richmond BC
My complete setup with all blocks and fans can be seen below:
http://service.futuremark.com/compare?3dmv=2241947
I've attached a pic of my loop. The MCP655 is on the bottom right and the res is external on the left side of the computer under the HDD's (This is what get trying to stuff all this WC crap in an antec 300...lol)
Loop is:
pump> triple rad > CPU > dual rad > GPU > res > pump
http://img84.imageshack.us/img84/5967/p1140381.jpg
Thanks for any advice, my last desktop was an air cooled barton 2500 and then I moved onto a w3j then y510 laptops for the next 4 years before this comp... so I have no idea what "normal" temps are these days... especially with the die shrinks.
The pictures are as follows:
Linpack
http://img249.imageshack.us/img249/194/2010072408h18cpu1.png
OCCT
http://img135.imageshack.us/img135/2418/2010072409h37cpu1.png
I'm using a e8400 e0 @4.2GHz... running about 1.4 vcore with vdroop on (only pulling 1.36v at load)
Ambient temp is around 23? I live in Richmond BC
My complete setup with all blocks and fans can be seen below:
http://service.futuremark.com/compare?3dmv=2241947
I've attached a pic of my loop. The MCP655 is on the bottom right and the res is external on the left side of the computer under the HDD's (This is what get trying to stuff all this WC crap in an antec 300...lol)
Loop is:
pump> triple rad > CPU > dual rad > GPU > res > pump
http://img84.imageshack.us/img84/5967/p1140381.jpg
Thanks for any advice, my last desktop was an air cooled barton 2500 and then I moved onto a w3j then y510 laptops for the next 4 years before this comp... so I have no idea what "normal" temps are these days... especially with the die shrinks.