• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

AquaComputer Question

D

DeadByDawn

Limp Gawd
Joined
Sep 3, 2004
Messages
477
Are Aquacomputer components really optimized for 6mm(1/4) tubing or 10mm(3/8) tubing?

It seems like 6mm. I want to use 10mm, but my engineering friend said that if the blocks are designed for only 6mm, then they would act a a huge pressure restriction and cause the pump to operate with a lot of load on it reducing its life expectency.
Any thoughts on this?

Thanks
 
Not always... I have a 6mmID system, less than 1/4 inch. Still, it keeps the athlon64 3000+@2600 mhz very happy at 36° C... along with GPU, Mosfets and PSU.

So low ID works, too.
 
Little Grabbi said:
Not always... I have a 6mmID system, less than 1/4 inch. Still, it keeps the athlon64 3000+@2600 mhz very happy at 36° C... along with GPU, Mosfets and PSU.

So low ID works, too.
Click to expand...


Cool. Got any pics?
 
You must log in or register to reply here.
Back
Top