• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

APC PDU AP7920 Web-Interface

D

Der_OPT

n00b
Joined
Apr 1, 2025
Messages
3
Hello everyone,
I have the following problem:
The AP7920 reliably receives its network settings via DHCP. Login via telnet or FTP works.
However, logging in via the web interface is not possible: "There was a problem loading the application. Please login to the device via telnet for more details."

In the network settings, it looks like this:

------- Web/SSL/TLS --------

1- Access: Enabled
2- SSL/TLS: Disabled
3- HTTP Port: 80
4- HTTPS Port: 443
5- Advanced SSL/TLS Configuration
6- Accept Changes

All outlets are disabled. If you log in via telnet as Device Manager, there is no way to configure anything.

Is there a way to make the device usable again via telnet or even better via web? Do I need the serial cable?
 
The device is working perfectly again. I unplugged the device for about 10 minutes. After that, everything worked as it should. Apparently, the full reset only took place after that.
Thank you for your support.
 
You must log in or register to reply here.
Back
Top