Anyone using simple Sata 3 to PCIe adapters?

Dracarys

Weaksauce
Joined
Dec 16, 2014
Messages
64
Hey guys,

I recently bought a low end LSI adapter for strictly reading to bypass the majority of sata 2 ports on my motherboard. The sequential reads/write are good (over 500mb), but the IOPs are cut in half sometimes when benched with Samsung Magician, which are most important in my line of production.

Specs:

3930k
x79 GA UD5
samsung pros and evos

My lsi card:

http://www.ebay.com/itm/New-IT-Mode...rt-PCI-E-6Gb-s-Controller-Card-/252344098349?

I have to set up a few more drives, I'm wondering if anyone has something straight forward like this:

https://www.newegg.ca/Product/Product.aspx?Item=9SIA66K3116880


Let me know your thoughts, if these don't bottleneck IOPs as much as the LSI, I might grab a couple.
 
Last edited:
As an eBay Associate, HardForum may earn from qualifying purchases.
The port multiplier will not be good for running more than 1 SSD. And if you are only running 1 SSD there is no point of it.

Remember it takes 1 input SATA port and splits the bandwidth of that 1 port to up to 5 SATA devices. I don't expect good bandwidth or IOPS with this. It is a hard drive geared device where people will be happy with 80 to 100 MB/s per port.
 
Last edited:
Let me know your thoughts, if these don't bottleneck IOPs as much as the LSI

For the best IOPs connect your SSDs to the Intel ports. Yes even the SATA II Intel ports.
 
Back
Top