![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Anyone have a Lanbox Lite Windowless
- Thread starter emerpus
- Start date
Do your research, there are plenty of measurements out there, Leman sugested and I went with the old xp-120 and i had just enough room to squeeze a 120 fan under the power supply.
What i'm discovering for myself is the fact that the lanbox doesnt have that much of a heat issue if you: a) re(move) the xtra hard drive cage. b) dont over clock it. c) replace the stock fans.
One little hot case experience i had follows:
I bought a 92mm zantech tornado (overkill and extremely loud) to replace the front fan, my wife now considers the machine unlivable so i stuck it in a cubby hole in my desk (roughly over an inch clearance on the sides and 5 inches on the top). Then i proceded to cover the hole with a folding table, no problem. One time though I threw a towel over the table in such a way that it wasnt getting very much fresh air, the temps never got in any sort of a danger zone but the case itself started transfering heat (everything was somewhat hot to the touch like the hood of a car). But as soon as i removed the towel and the table the case was nice and cool and the temps were normal in under a min or so, which in my mind was quite impressive.
What i'm discovering for myself is the fact that the lanbox doesnt have that much of a heat issue if you: a) re(move) the xtra hard drive cage. b) dont over clock it. c) replace the stock fans.
One little hot case experience i had follows:
I bought a 92mm zantech tornado (overkill and extremely loud) to replace the front fan, my wife now considers the machine unlivable so i stuck it in a cubby hole in my desk (roughly over an inch clearance on the sides and 5 inches on the top). Then i proceded to cover the hole with a folding table, no problem. One time though I threw a towel over the table in such a way that it wasnt getting very much fresh air, the temps never got in any sort of a danger zone but the case itself started transfering heat (everything was somewhat hot to the touch like the hood of a car). But as soon as i removed the towel and the table the case was nice and cool and the temps were normal in under a min or so, which in my mind was quite impressive.