Any freeware to clone a disk to a ssd?

Closezilla is for linux but I could need it someday.
EaseUS is pay

And Macrium Relect free worked good. I'm running on the clone right now and everything appear to be fine!

Thanks bro!

A) Clonezilla works with windows.
B) EASEUS todo free edition works excellent for this task and is free.
 
Clonezilla, doesn't care what OS is on the drive, it just copies. The question is if you need to re-size the OS partition, there's where this process gets tricky. Most of the free-ware software will not let you copy a larger partition do a smaller drive, without using a tool to reduce the partition size first, i.e. GParted. The easiest scenario is getting a Samsung drive and using their software, it works beautifully.
 
Just grab the software that your HD MFG uses, even if cloning off of it, it will work.

WD: Software and Firmware Downloads | WD Support (acronis WD Edition)
Seagate: DiscWizard | Seagate (called diskwizard, still acronis)
Toshiba: NTI - Backup and Storage Management Software, CD DVD Burning Software - Official Site (this may be only to a toshiba drive, I've never tried it)
Hitachi: Hitachi/Fujitsu Hard Drive Backup Software Solution

etc. Easy enough to find, and I have used the first two (both acronis) several times depending on source drive brand.
 
If you look around you can typically get a key to Acronis fairly cheap which is the easiest, fastest, and IMO best solution.
 
+1 for Clonezilla.
Works well with just about any OS and file system, is free, and I have personally moved OSes from HDDs to SSDs using it.
 
many programs will clone it but not many will make it boo table.. Unless you have one of those systems with a built in UEFI OEM strong in the bios.. like if you have a dell after cloning it, it will boot and reactivate itself.. For the rest of us it is a royal pain to get it working again. So copying the data itself is the easy part.. GPT partitions each have a separate unique ID even when cloning disks.. Microsoft will boot off this ID and it is the 100mb partition containing the boot loader/manager.. AOMEI backup will compress and create an image of the disk far smaller than the drive.. In case you have to keep copying the drive to get it to boot back properly. My 70GB SSD boot partition ends up as a 25GB image... Their partition assistant also clones..

Well reinstalling windows again is not really cloning but it is the easiest way.. Microsoft also made this part harder, they dont allow you to upgrade unless you boot off the drive and select upgrade.. Was not like this in the old days.. So it was far easier as all your links and data and paswords could be easily recovered..
 
Another vote for Clonezilla for all your drive cloning needs.
If you need to go from larger HDD drive to smaller SSD drive (this assumes that the actual data stored on the larger HDD partition is less than the maximum size the SSD partition can be made), PM me and I'll send you step by step instructions.
 
I'm using AOMEI Backupper Standard edition, and this is free. In addition, it may be very good while using it to clone drive to SSD, since it can help to "align partition to optimize for SSD" (one of its utilities).
For this, I have not tried yet, but what I know "there are two alignment possibilities used by Windows:CHS(Cylinder, Head, Sector)alignment and 1MB alignment. And SSD require partition alignment to 4KB boundaries for optimum performance and life, which is fine with 1MB aligned partitions (1MB aligned partitions are also aligned on 4KB boundaries) but not CHS aligned partitions(CHS aligned partition are often aligned on 31.5KB which will degrade SSD performance and life time)". It seems like the alignment is much important to get the best SSD performance, so why not trying AOMEI to finish job.
 
Macrium is easy peasy. Worked doing exactly that from 11 year old machine (Rust>SSD)to a newish one SSD-SSD.
 
Partition Wizard is a great bit of software. I've used a lot of the others mentioned but this is my go to software for disk editing and cloning.
 
Back
Top