Antec Three Hundred conversion to 9 5.25?

OrangePeel

n00b
Joined
Aug 19, 2012
Messages
15
Hi all,

I have two Three Hundreds at home. One is for my server, the other is my desktop. I have begun the process of digitizing my movies. I also have general storage and backup space on my server. I'm running ESXi with IOMMU to passthrough an IBM m1015 to a Server2008R2 VM (TechNet... its legit :) ) and I'm planning on running FlexRAID. If I don't like FlexRAID in the end, I may just do Unraid. Either way, I need more HDD slots.

I have two 2U Supermicro server chassis that I was planning on using for storage, but they're just too loud for the 1 bedroom apartment I'm living in at the moment and its probably going to be at least 6 more months before my wife and I buy a house.

So, I want more HDD space and I'd prefer it be hot swap. I'm thinking about selling the two Supermicro chassis (or trading them) for two of the Supermicro 5 in 3 HDD cages and modifying my server Three Hundred to accept two of them in the bottom in place of the 120mm fans and 3.5" rails that are currently there. It looks like the one side of the 3.5" rails are even with 5.25 above, so I should be able to use that as the anchor point for one side and stick a wooden ruler cut to size on the other side to support that after cutting the front out.

What do you guys think? Has anyone done this before? I've searched a bit and I've not been able to find anything, but thought maybe someone would have some ideas here. :)

Brandon
 
You'd be better off finding some old 900s if your going to do that. They were designed with the removal of the front 120s for more 5 1/4s in mind.
 
Thanks for the reply.

The only thing about the 900 is that A) its a little bit ugly. Especially considering I already have a 300 that would be sitting next to it and B) that would add $50 more to my overall cost.

I still may consider it. I'd rather have two matching 300s I'm pretty sure, but its an option. :)

Brandon
 
Good point... none on eBay at the moment... the Azza 910 seems like a potential option, too. Hmmm... tough decision. I really like the Azza as it is a fairly clean case. I'm not fond of the 900. It looks like its trying too hard. :)

Thanks for the suggestion!

Brandon
 
If you're halfway decent at modding, I've got an old Antec 300 I can pull the 5.25" bay out of. I might even have one additional one from the last 300 I chopped up. I also have a HEC 98 with 5.25" bays pretty much all the way down if you're interested.
 
Also you can check to see if you can find the cooler master stacker series. They have nine 5.25" bays. Here is what mine looked like

DSC00252.JPG
 
Thanks for the reply and the offer. I've actually decided to go with the Azza 910. :) My brother is wanting a new computer, so he is buying my Three Hundred and I'm buying the Azza. They're very close in look and dimensions, so I think it will make sense and not cost too much.

Just for the record, do you think it would make sense to do the entire front of a 300 5.25s? I can't imagine it would be too difficult to do since one side would remain (the 3.5s and 5.25s share a side in the first version of the 300... the newer version is different, though).

Brandon
 
The Three Hundred is a great case to put lots of hard drives in it.
 
Back
Top