Antec 900 Cable Management

[Rydawg5143]

I'll be replacing my Corsair 450 with a Corsair 750, I found 'hiding' the cables from my 450 was pretty hard. Any1 have any ideas for me?

 

[Whoodie]

http://www.xtremesystems.org/forums/showthread.php?t=126395

 

[Keep The Volume Up]

Hiding cables will remain a severe task since you are looking at a non-modular PSU. I would recommend a modular power supply, and only use the cables you need.

 

[Rydawg5143]

eh, well thats not really an option, just bought a brand new corsair 750 and dont want to hassle with the return of it, guess i'll deal with it for now

 

[Keep The Volume Up]

Since I too have an A900, do what Whoodie said. Read through that link he gave you. It should really give you a good idea about cable management.

You will see me in there at the 30+ page mark.

 

[Aidzero]

in the antec ninehundred your best bet is to run everything you can behind the board, and use gratuitous amounts of duct tape. You could also get creative with some hosing.

 

[Keep The Volume Up]

... use gratuitous amounts of duct tape.

Duct tape grants you access into the "Ghetto Mod" thread.

Use zip-ties. They won't leave a nasty residue behind.

 

[Wendig0]

^ thats one of the sexiest Antec 900 systems i've ever seen.

 

[soundguy]

yah, its great...

theres plenty you can do to improve A900's, but they're right, modular PSU's definately help, but here you have my approach:

i haven't been using this rig all that much because of school and homework etc, and it has been at my friend's house for a while. (i am getting a bit sick of the P4 aswell...) i reckon that i am going to move away from the A900...

not trying to put you off it, but yeh as you can see in mine, if you don't want to, or don't have the time (me both) to mod you 900, you can just do a similar thing to what i did (probably what Keep The Volume Up has done, similar too that) using some tape and ties.

why do you need the 750w PSU anyway? the HX620 should be plenty for a sli setup...